The effects of climate change and global warming are arising a new awareness on the impact of our daily life. Power generation for transportation and mobility as well as in industry is the main responsible for the greenhouse gas emissions. Indeed, currently, 80% of the energy is still produced by combustion of fossil fuels; thus, great efforts need to be spent to make combustion greener and safer than in the past. For this reason, a review of the most recent gas turbines combustion strategy with a focus on fuels, combustion techniques, and burners is presented here. A new generation of fuels for gas turbines are currently under investigation by the academic community, with a specific concern about production and storage. Among them, biofuels represent a trustworthy and valuable solution in the next decades during the transition to zero carbon fuels (e.g., hydrogen and ammonia). Promising combustion techniques explored in the past, and then abandoned due to their technological complexity, are now receiving renewed attention (e.g., MILD, PVC), thanks to their effectiveness in improving the efficiency and reducing emissions of standard gas turbine cycles. Finally, many advances are illustrated in terms of new burners, developed for both aviation and power generation. This overview points out promising solutions for the next generation combustion and opens the way to a fast transition toward zero emissions power generation.

In recent years, pumps operated as turbines (PaTs) have been gaining the interest of industry and academia. For instance, PaTs can be effectively used in micro hydropower plants (MHP) and water distribution systems (WDS). Therefore, further efforts are necessary to investigate their fluid dynamic behavior. Compared to conventional turbines, a lower number of blades is employed in PaTs, lowering their capability to correctly guide the flow, hence reducing the Euler’s work; thus, the slip phenomenon cannot be neglected at the outlet section of the runner. In the first part of the paper, the slip phenomenon is numerically investigated on a simplified geometry, evidencing the dependency of the lack in guiding the flow on the number of blades. Then, a commercial double suction centrifugal pump, characterized by the same specific speed, is considered, evaluating the dependency of the slip on the flow rate. In the last part, a slip factor correlation is introduced based on those CFD simulations. It is shown how the inclusion of this parameter in a 1-D performance prediction model allows us to reduce the performance prediction errors with respect to experiments on a pump with a similar specific speed by 5.5% at design point, compared to no slip model, and by 8% at part-loads, rather than using Busemann and Stodola formulas.

The regulatory restrictions, currently acting, impose a significant reduction of the Greenhouse Gas (GHG) emissions. After the coal-to-gas transition of the last decades, the fossil fuel-to-renewables switching is the current perspective. However, the variability of energy production related to Renewable Energy Sources requires the fundamental contribution of thermal power plants in order to guaranty the grid stability. Moving toward a low-carbon society, the industry is looking at a reduction of high carbon content fuels, pointing to Natural Gas (NG) and more recently to hydrogen-NG mixtures. In this scenario, a preliminary study of the BERL swirled stabilized burner is carried out in order to understand the impact of blending natural gas with hydrogen on the flame morphology and CO emissions. Preliminary 3D CFD simulations have been run with the purpose to assess the best combination of combustion model (Non Premixed and Partially Premixed Falmelets), turbulence model (Realizable k ɛ and the Reynolds Stress equation model) and chemical kinetic mechanism (GriMech3.0, GriMech 1.2 and Frassoldati). The numerical results of the BERL burner fueled with natural gas have been compared with experimental data in terms of flow patterns, radial temperature profiles, O₂, CO and CO₂ concentrations. Finally, a 30% hydrogen in natural gas mixture has been considered, keeping fixed the thermal power output of the burner and the global equivalence ratio.