The thermal buckling load on perforated composite plates is affected by several parameters, including design variables such as cut-out orientation, fibre angle, bluntness of cut-out corners, cut-out size to plate size ratio and stacking sequence. This study investigates the effect of these parameters on the thermal buckling load of a composite plate with a quasi-square cut-out. Optimal values of the parameters are determined using a genetic algorithm to achieve the maximum buckling load. The composite used herein is a four-layer laminated composite plate. The stacking sequences of the plate are also studied. Stability equations are obtained using first order shear deformation theory. The results showed that a plate with a quasi-square cut-out is more resistant to thermal buckling than one with a circular cut-out; thermal buckling of a composite plate is dependent on various parameters, and the maximum thermal buckling load can be achieved by appropriate selection of these parameters.
In this paper, the thermal buckling of composite shells with selected boundary conditions under uniform and linearly distributed thermal load is investigated. The theoretical modeling procedure is based on semi-analytical finite element method. The effects of important structural parameters such as amount of cut-out at apex, fiber angles as well as temperature distributions are taken into consideration. The obtained results from the present analysis are compared with some available published results to show the accuracy and robustness of the present method.