28 March 2014 in Journal of Thermal Stresses
1 December 2014 in Aerospace Science and Technology
20 September 2019 in Archive of Applied Mechanics
26 September 2015 in Archive of Applied Mechanics
16 September 2015 in Journal of Thermal Stresses
In this research, the buckling behavior of functionally graded (FG) plates under thermal loading is investigated based on finite element analysis. It is assumed the plate is subjected to a uniform temperature rise across plate thickness. First-order shear deformation theory (FSDT) is utilized for developing the solution method. By using an appropriately designed mesh structure for a perforated plate, the critical thermal buckling temperature is obtained by numerical solution of the problem based on finite element method (FEM). The FG plate is perforated by multiple cutouts. The number of cutouts is assumed one, two, four, or six. Also different geometrical shapes of cutouts including triangle, square, rhombus, pentagon, hexagon, and circle are considered. The influence of the number of cutouts and their geometrical shapes on thermal buckling response is investigated. The effects of the number of sides of cutouts from three (triangle) to infinity (circle) are discussed. Two different boundary conditions are taken into account. Also the influences of the distance between the cutouts and the orientation of cutouts on critical buckling temperature are studied. In addition, the effects of the orientation of ellipse cutouts are studied. Some remarkable conclusions are gained that can be useful in practical applications.
29 November 2012 in Applied Mechanics and Materials
In this paper, kinematic relationships for a 3-PRR planar parallel robot are first presented. The robot dynamics equations are formulated using Lagrange equations of first kind. The derived equations are a mixed set of differential and algebraic constraint equations, DAE, which must be satisfied simultaneously. In order to solve the robot dynamic equations, a new method is presented in which the dynamics equation is first partitioned into two parts. The constraint equations and the dependent coordinates are next eliminated. This reduces the dynamic equations to a set of differential equations as a function of three independent coordinates. Finally, a trajectory for the robot end-effector is specified and PD controller which follows the desired trajectory is implemented. The proposed method significantly simplifies the solution of the dynamics equations.