The flux of magnetic helicity characterizes how the topology of a magnetic field changes and helicity and its transport play essential roles in plasma equilibrium and instabilities in the reversed-field pinch (RFP) device configuration. Used to suppress magnetohydrodynamic instabilities effectively, the stabilizing conducting shell located at the boundary of an RFP device is always characterized by an eddy-current distribution that evolves rapidly with time. After measuring and analyzing the eddy currents on this stabilizing shell during tokamak discharges in the Keda Torus eXperiment device, the distributions of multiple physical quantities on the shell are obtained, including the magnetic fields, eddy currents, and electric fields. An experimental technique for measuring helicity flux density is demonstrated, combined with eddy-current diagnosis and these physical vectors on the boundary. How the magnetic and current helicity flux densities evolve is given by a feasible mathematical analysis, and data suggest that the plasma mediates both the generation and transport of magnetic helicity during the discharge. The experimental results of the distribution of the magnetic helicity flux densities (MHFDs) due to the instability on the boundary are given, and the average of these MHFDs over the whole boundary surface is far less than the maximum value of the MHFDs. In addition, the results of current helicity flux densities on the boundary are also presented.
The Keda Torus eXperiment (KTX) is a reversed field pinch (RFP) magnetic confinement device located in China. Due to the non-ideal conductivity of the copper shell and the presence of a toroidal gap, KTX is susceptible to magnetohydrodynamic (MHD) instabilities and error fields, which can significantly degrade plasma discharge quality. To actively control these MHD instabilities, we developed a real-time feedback control system based on LabVIEW-FPGA. This system is integrated into the active control feedback electronic system (ACFES). It combines hardware for data acquisition, processing, and aggregation with a corresponding software platform to analyze real-time MHD instability modes in KTX. The system subsequently transmits active control feedback signals to the KTX digital power supply array, generating a compensating magnetic field to mitigate MHD instability. Experimental results demonstrate that our system effectively extends the discharge duration of KTX.
Active-control coils on Keda Torus eXperiment (KTX) are used to suppress error fields and mitigate MHD instabilities, thereby extending discharge duration and improving plasma confinement quality. Achieving effective active MHD control imposes stringent requirements on the coil power supplies: wide-bandwidth and high-precision current regulation, deterministic low-latency response, and tightly synchronized operation across 136 independently driven coils. Specifically, the supplies must deliver up to ±200 A with fast slew rates and bandwidths up to several kilohertz, while ensuring sub-100 μs control latency, programmable waveforms, and inter-channel synchronization for real-time feedback. These demands make the power supply architecture a key enabling technology and motivate this work. This paper presents the design and simulation of the KTX active-control coil power supply. The system adopts a modular AC–DC–AC topology with energy storage: grid-fed rectifiers charge DC-link capacitor banks, each H-bridge IGBT converter (20 kHz) independently drives one coil, and an EMC filter shapes the output current. Matlab/Simulink R2025b simulations under DC, sinusoidal, and arbitrary current references demonstrate rapid tracking up to the target bandwidth with ±0.5 A ripple at 200 A and limited DC-link voltage droop (≤10%) from an 800 V, 50 mF storage bank. The results verify the feasibility of the proposed scheme and provide a solid basis for real-time multi-coil active MHD control on KTX while reducing instantaneous grid loading through energy storage.