Plasma jet cutting process is a well-known nonconventional thermo-electrical manufacturing process that is widely used in metal and shipbuilding industry. It uses the energy of highly ionized gas to cut various types of metal materials. Cutting process is determined by technological parameters whose values define the final cut quality results. Cut quality can be defined considering different characteristics such as: kerf width, bevel angle, surface roughness, dross height and heat affected zone. In this paper, a research on the influence of variable process parameters on the heat affected zone (HAZ) was conducted. An investigated material was aluminium alloy EN AW 5083. HAZ analysis was done by measuring hardness changes on the specimen cross sections and by microscopic observation of the material structure.
This study focuses on improving the fatigue strength and overall performance of sustainable biopolymer polylactic acid (PLA) components manufactured via Fused Deposition Modelling (FDM) additive manufacturing process. PLA, as a biodegradable and renewable polymer derived from natural resources, represents a promising alternative to conventional petroleum-based plastics in engineering and research applications. The influence of key FDM process parameters—layer height, infill density, and number of perimeters—on critical performance indicators such as filament consumption, printing time, and fatigue strength (number of cycles to failure) was systematically analyzed using the Taguchi L9 orthogonal array. Subsequently, Grey Relational Analysis (GRA) was applied as a multi-objective optimization technique to identify the parameter settings that achieve an optimal balance between mechanical durability and resource efficiency. The obtained results demonstrate that a proper combination of process parameters can significantly enhance the mechanical reliability and sustainability profile of FDM-printed PLA parts, contributing to the broader adoption of eco-friendly materials in additive manufacturing.
1 October 2019 in Tehnicki vjesnik - Technical Gazette
Main aim of this research was to investigate unconventional method for aluminium recycling. Recycling process presented in this research was performed in solid state and therefore is called solid state recycling (SSR) or direct...
1 August 2017 in Tehnicki vjesnik - Technical Gazette
Svrha ovog rada bila je utvrditi uzrok nastajanja korozijskih oštećenja na toplovodnim čeličnim šavno zavarenim pocinčanim cijevima. U tu svrhu, bilo je potrebno provesti analizu kemijskog sastava cijevi toplovoda, ispitivanje...
In this paper, the electrochemical properties of high - purity aluminium with the addition of small amounts of gallium at high cathodic potentials have been investigated. The anodic current was followed through time in order to determine the quantity of charge needed for the formed substances oxidation. Anodic current responses for the period of 1 s were recorded. Time responses for the cathodic and anodic currents were recorded and showed in characteristic diagrams. The range of low and high cathodic potentials (LCP, HCP) was defined for all samples. For the experimental work, standard electrochemical cell with saturated calomel electrode (SCE) and platinum counter electrode were used. The solution 2 M NaF was used for this work.