A new linear polymer containing the dialkylaniline-substituted electron-rich alkynes in the side chains was designed and synthesized by copper-catalyzed azide–alkyne cycloaddition (CuAAC). Subsequently, donor–acceptor chromophores were introduced into the side chains of the polymer by the [2 + 2] click reaction as an efficient postfunctionalization method. The polymers showed good solubility in common organic solvents and a high thermal stability. The photophysical and electrochemical properties, as well as the click reactions, were characterized by means of UV-vis absorption spectroscopy and cyclic voltammetry. After the introduction of donor–acceptor chromophores, the polymer showed a strong charge-transfer (CT) band in the visible absorption region, potent redox activities and a narrow band gap (1.36 eV). In addition, the third-order nonlinear properties, including the nonlinear absorption and the nonlinear susceptibilities, were investigated by using the Z-scan technique. A typical saturable absorption behavior was observed for the third order nonlinear absorption, with the nonlinear absorption coefficient (β) values of the polymer being −5.8 × 10−12 m W−1.
2 January 2022 in International Journal of Smart and Nano Materials
A design strategy for a mechanical metamaterial with large negative hygroscopic expansion (NHE) was proposed in this paper. Different from the reported structures, the present metamaterial is designed by constructing repeated lattice microstructure consisting of curved ligaments incorporating hydrogel active layers and polymer support layers and straight polymer bars. When immersed in the solution environment, the swelling of hydrogel layer of such composite structure induces the reversed bending of the ligament, leading to the overall ultra-large shrink (negative expansion) deformation of the metamaterial. Through the new structural design, large NHE effects can be achieved. The theoretical investigation and finite element analysis (FEA) were conducted to demonstrate the large negative expansion effects of such metamaterial. The results showed that the effective NHE ratio of the metamaterial is dependent of the curvature of the curved ligament and the size of both the ligament and the connecting rod. The ultra-large NHE ratios about −80% for the 2D structure and −90% for the 3D version can be obtained by adopting the structural parameters. The newly designed metamaterials have potential applications in medical and other fields. GRAPHICAL ABSTRACT
The new electronically active poly(vinylene sulfide)s containing dialkylaniline-substituted electron-rich alkynes in the side chains were designed and synthesized by the ‘thiol-click’ polymerization. Subsequently, the donor–acceptor chromophores were introduced into the side chains of the polymer by the [2 + 2] click reaction as an efficient postfunctionalization method. The polymers showed good solubility in common organic solvents and high thermal stability. The photophysical and electrochemical properties, as well as the click reactions, were characterized by means of UV-vis absorption spectroscopy, cyclic voltammetry, etc. After the introduction of donor–acceptor chromophores, the polymer showed a strong charge-transfer (CT) band in the visible absorption region, potent redox activities and a narrow band gap compared with the precursors. In addition, the third-order nonlinear properties, including the nonlinear absorption and the nonlinear susceptibilities, were investigated by using Z-scan techniques. A typical saturable absorption behavior was observed for the third order nonlinear absorption, with the nonlinear absorption coefficient (β) values of the polymer being −9.0 × 10−12 m W−1.
Using the polymerization-induced phase separation (PIPS) method, bilayer polymer-dispersed liquid crystal (PDLC) films with a PDLC-PVA-PDLC structure were prepared in this work. It was found that all PDLC performance indexes were affected by polymer mesh size after comparing the microscopic morphology and electro-optical properties of samples with different monomer ratios. Gd2O3 nanoparticles and rhodamine B base fluorescent dyes introduced into the bilayer PDLC optimized the samples’ electro-optical properties and developed new functionalities. In addition, the bilayer PDLC doped with Gd2O3 and rhodamine B base held excellent progressive driving functions as well as stable durability properties. Samples doped with Gd2O3 nanoparticles and rhodamine B base also produced excellent anti-counterfeiting effects under UV irradiation at different angles, further exploiting the application potential of PDLC.
Laser attracts more attention and it could cause material failure by its high energy. Carbon fiber resin composites are widely used in aerospace vehicles experiencing dramatic damage to their surface if exposed to high-energy laser irradiation. The available studies on irradiation behavior are mainly focused on pulsed lasers and bulk composites, and investigations of thin laminar structures under continuous-wave laser irradiation have rarely been reported. In this study, the damage behavior of laminar carbon fiber epoxy resin composites (CFE composites) was studied. Using a threshold model of resin pyrolysis, CFE composite is observed to be damaged at 0.18 s when irradiated at 100 W/cm2, and if the laser power density is increased to 200 W/cm2 for 2 s, no resin remains on the fiber surface, which is now completely exposed. With an increase in power density and irradiation time, the ablation rate always shows an upward trend: the ablation region expands and the separation of layers in the interior appears, which can reach 0.01156 g/s when irradiated at 100 W/cm2 for 5 s. The damage mechanism of CFE composite was also revealed by the temperature evolution data, thermogravimetric analysis, and composition change.
Deformable superstructures are man‐made materials with large deformation properties that surpass those of natural materials. However, traditional deformable superstructures generally use conventional materials as substrates, limiting their applications in multi‐mode reconfigurable robots and space‐expandable morphing structures. In this work, amine‐acrylate‐based liquid crystal elastomers (LCEs) are used as deformable superstructures substrate to provide high driving stress and strain. By changing the molar ratio of amine to acrylate, the thermal and mechanical properties of the LCEs are modified. The LCE with a ratio of 0.9 exhibited improved polymerization degree, elongation at break, and toughness. Besides an anisotropic finite deformation model based on hyperelastic theory is developed for the LCEs to capture the configuration variation under temperature activation. Built upon these findings, an LCE‐based paper‐cutting structure with negative Poisson's ratio and a 2D lattice superstructure model are combined, processed, and molded by laser cutting. The developed superstructure is pre‐programmed to the configuration required for service conditions, and the deformation processes are analyzed using both experimental and finite element methods. This study is expected to advance the application of deformable superstructures and LCEs in the fields of defense and military, aerospace, and bionic robotics.