NiS/NiO nanoparticles are successfully fabricated through a simple dealloying method and an ion-exchange process. X-ray diffraction demonstrates the existence of NiO and NiS phases, and scanning electron microscopy and transmission electron microscopy imply the nanopore distribution nature and the nanoparticle morphology of the produced material. The electrochemical behaviors are studied by cyclic voltammetry and galvanostatic charge–discharge measurements. The NiS/NiO electrode shows an enhanced specific capacitance of 1260 F g^–1 at a current density of 0.5 A g^–1. The NiS/NiO//AC device provides a maximum energy density of 17.42 W h kg^–1, a high power density of 4000 W kg^–1, and a satisfactory cycling performance of 93% capacitance retention after 30,000 cycles.

Electromagnetic shielding materials are special materials that can effectively absorb and shield electromagnetic waves and protect electronic devices and electronic circuits from interference and damage by electromagnetic radiation. This paper presents the research progress of intrinsically conductive polymer materials and conductive polymer-based composites for electromagnetic shielding as well as an introduction to lightweight polymer composites with multicomponent systems. These materials have excellent electromagnetic interference shielding properties and have the advantages of electromagnetic wave absorption and higher electromagnetic shielding effectiveness compared with conventional electromagnetic shielding materials, but these materials still have their own shortcomings. Finally, the paper also discusses the future opportunities and challenges of intrinsically conductive polymers and composites containing a conductive polymer matrix for electromagnetic shielding applications.

The selective photocatalytic breaking of C_α–C_β bonds holds significant promise in converting lignin biomass into value-added aromatic chemicals.

The liquid-phase method is the most commonly utilized strategy for synthesizing fluorescent carbon quantum dots (CQDs). However, the liquid-phase synthesis of CQDs faces challenges such as low yield, complex purification, and the use of toxic solvents, which limit large-scale production and practical applications. In this study, fluorescent CQDs with a high product yield of 78% were synthesized using glucose as a carbon source through a green and facile one-step solid-phase approach, without solvents or post-treatment. A systematic study of the structure and fluorescence properties of the synthesized CQDs was conducted using various characterization techniques. The results indicated that the mean size of obtained CQDs was 4.1 nm, and that their surface had abundant oxygen-containing functional groups, resulting in favorable water solubility. The synthesized CQDs exhibited excitation-dependent fluorescence, with optimal excitation and emission wavelengths at 358 and 455 nm, respectively. Additionally, the CQDs solution showed bright blue fluorescence under 365 nm UV light, with a quantum yield of 6.21% and a fluorescence lifetime of 3.02 ns. This study offers valuable insights into the green and efficient synthesis of fluorescent CQDs powder.

In this study, a polymer dispersed cholesteric liquid crystal (PDChLC) film obtained via a one-step fabrication technique based on photopolymerization of a thiol-acrylate reaction system was prepared and characterized for the first time. The effects of the chiral dopant, the influence of thiol monomer functionality and content on the morphology and subsequent performance of the PDChLC films were systematically investigated. It was demonstrated that the addition of a small amount of chiral dopant slightly increased the driving voltage, but decreased the off-state transmittance significantly. Furthermore, scanning electron micrographs (SEM) shown that the liquid crystal (LC) droplet size decreased at first and then increased with the increasing amount of thiol monomer functionality, while increasing the thiol content increased the LC droplet size. Correspondingly, the electro-optical switching behavior was directly dependent on LC droplet size. By tuning the raw material composition, PDChLC film with optimized electro-optical performance was prepared.