Hard X-ray photoelectron spectroscopy (HAXPES) is a powerful tool for investigating the chemical and electronic states of bulk and buried interface in a non-destructive manner due to the large probing depth of this technique. At BL46XU of SPring-8, there are two HAXPES systems equipped with different electron spectrometers, which can be utilized appropriately according to the purpose in various industrial researches. In this article, these systems are outlined, and two typical examples of HAXPES studies performed by them are presented, which focus on the silicidation at Ni/SiC interface and the energy distribution of interface states at SiO2/a-InGaZnO.
1 October 2012 in Japanese Journal of Applied Physics
We used several analytical methods to identify the mechanism underlying the performance degradation in a photovoltaic (PV) module subjected to long-term (10 years) field exposure. Cloudy visual defects in this module were caused by delamination between the poly(ethylene vinyl acetate) (EVA) and antireflection coating films on the Si substrate. The delamination was considered to be caused by the formation of a segregation layer and oxidative degradation of EVA. Furthermore, it was found that sodium ions diffused from the superstrate glass into the EVA film and Si cell. We confirm that diffusion of sodium ions caused the degradation of Si cells and the superstrate glass of this module.
12 September 2012 in Molecular Crystals and Liquid Crystals
In situ and real-time observation of 2-dimensional grazing incidence x-ray diffraction (2D-GIXD) during growth of pentacene thin films were carried out using a newly home-built portable vacuum deposition chamber using synchrotron radiation at SPring-8. Crystal growth and successive polymorphic transformation from thin film phase to bulk phase are clearly observed at room temperature and 75°C. A distinct orientation of bulk phase characterized by tilted (001) plane is found in the grown thin films at room temperature.
We investigated the characteristics of carrier transport and crystallographic orientation distribution in 500-nm-thick Al-doped ZnO (AZO) polycrystalline films to achieve high-Hall-mobility AZO films. The AZO films were deposited on glass substrates at 200 °C by direct-current, radio-frequency, or radio-frequency-superimposed direct-current magnetron sputtering at various power ratios. We used sintered AZO targets with an Al2O3 content of 2.0 wt. %. The analysis of the data obtained by X-ray diffraction, Hall-effect, and optical measurements of AZO films at various power ratios showed that the complex orientation texture depending on the growth process enhanced the contribution of grain boundary scattering to carrier transport and of carrier sinks on net carrier concentration, resulting in the reduction in the Hall mobility of polycrystalline AZO films.