Masonry infills are among the most seismically vulnerable components in reinforced concrete frame structures. One promising mitigation strategy involves the use of rubber joints, which has shown potential in prior studies. However, further experimental and numerical investigations are needed to fully understand their effectiveness under realistic seismic conditions and to support evidence-based design. To address this, the EU-funded H2020 project FLExible JOInts for seismic-resilient design of masonry-infilled RC frames (FLEJOI) was conducted within the Engineering Research Infrastructures for European Synergies (ERIES) project. Two identical RC frame prototypes with brick infills and different rubber joint systems were constructed and tested at the Institute of Earthquake Engineering and Engineering Seismology – IZIIS in North Macedonia. The first system reduced panel stiffness and increased damping, while the second completely decoupled the infill from the frame. Both were subjected to extensive shaking table testing. This paper presents the resulting dataset, comprising detailed measurements from sensors monitoring the RC frames, infills, and joints – serving as a valuable benchmark for model validation and future research.
This paper presents the outcomes of an extensive experimental investigation on the seismic performance of an innovative exoskeleton retrofitting system, developed as part of the ERIES-RESUME project. The proposed system integrates laminated timber and aluminium components to enhance the structural resilience of existing reinforced concrete (RC) buildings, while also offering the potential for thermal upgrading. Two identical 1:3 scale RC models, representing typical non-ductile structures, were tested on a shaking table at the IZIIS Laboratory of the Institute of Earthquake Engineering and Engineering Seismology in Skopje. The first model, initially unstrengthened, was subjected to seismic loads until significant structural and infill-wall damage was reached. Following appropriate repairs, the exoskeleton was applied, and the model was retested. The second model was equipped with an exoskeleton from the outset. Test results demonstrate significant improvements in seismic performance, including increased stiffness, reduced interstory drifts, reduced acceleration amplification, and reduced infill wall damage. The study confirms the feasibility and effectiveness of the proposed exoskeleton system as a practical solution for retrofitting vulnerable reinforced concrete buildings.
Field investigations, testing and monitoring of structures and soil conditions is an imperative for precise decision making. When the time and the access to the location are additional constrain, having a reliable and comprehensive mobile laboratory equipped with state-of-the-art equipment is a huge advantage over conventional field investigations methods. This paper will delve into the key activities and capabilities of the integrated mobile laboratory (EQ-MOBI-LAB) from IZIIS, focusing on its role in conducting field investigations and assessing damage resulting from earthquakes and other incidents.