Yu Huang

Yu Huang


Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
12 September 2018 in Actuators
Verified
Journal Article
Open access
PDF file
YHYu Huang
Yu Huang
SZShuangjie Zhang
Shuangjie Zhang
PWPenghui Wang
Penghui Wang
YXYue Xue Xia
Yue Xue Xia
DLDian Hua Lin
Dian Hua Lin
LLLeong-Chew Lim
Leong-Chew Lim
High fidelity (Hi-Fi) piezoelectric single crystal stake actuators are presented in this work. They are made of multiple rectangular d32 mode lead-based relaxor ferroelectric (notably Pb(Zn1/3Nb2/3)O3-PbTiO3 (PZN-PT) and Pb(In0.5Nb0.5)O3-Pb(Mg1/3Nb2/3)O3-PbTiO3 (PIN-PMN-PT)) single crystals bonded along their long edges with the aid of compliant polymeric edge guides into a square or polygonal pipe-like construction. Due to the highly stable engineered domain structure and high piezoelectricity of single crystal active materials, the actuators exhibit large linear displacement responses with negligible (<1%) hysteresis. Prototypes of square-pipe stake actuators were first fabricated and their phase transformation curves under different applied voltages, axial compressive loads and temperatures were established. Based on the information obtained, a range of Hi-Fi stake actuators with external square cross-sections of 5 × 5 mm2, 7.5 × 7.5 mm2 and 10 × 10 mm2, each of 4 different overall lengths of 15, 28, 41 and 54 mm, were further designed and fabricated using either PZN-PT or PIN-PMN-PT single crystals (both with TRO ≈ 110–125 °C) of 0.4 mm in crystal thickness. The stroke for the longest stake actuator fabricated (L = 54 mm) reaches −58 µm at 240 V. The working conditions, over which these Hi-Fi stake actuators remain linear with negligible hysteresis, were established for a total load of up to 10 kg and use temperature of up to 40 °C.

12 September 2018 in Actuators
Verified
Journal Article
Open access
PDF file
YHYu Huang
Yu Huang
YXYue Xue Xia
Yue Xue Xia
DLDian Hua Lin
Dian Hua Lin
LLLeong-Chew Lim
Leong-Chew Lim
High-authority piezoelectric actuator (HAPA) is a term used to describe high-performance piezoelectric actuators of relatively large displacement (≥50 μm) and high blocking force (≥100 N), but compact in size. One such piezoelectric actuator is described in this paper, which is made possible by means of high-bending-stiffness connector (HBSC) that connects multiple commercial piezoceramic stacks into a stable 2- (or multi-) level actuation configuration. Key design requirements for the HBSC are described. Computer simulation results and experimental verification are presented. A HAPA-(2 + 2) actuator was fabricated from such a HBSC, in which there are two commercial PZT stacks projecting upwards in the upper level and two projecting downwards in the lower lever, all of 5 × 5 mm2 in cross-section and 40 mm in length. The HAPA-(2 + 2) actuator prototype displays about twice the overall stroke and blocking force of individual stacks, being about 90 μm and >1600 N, respectively. This compares favorably with lever-arm, flextensional, and telescopic actuators, of which the blocking force is adversely affected. Using a similar concept, HBSCs and HAPAs of other designs are presented. In addition to being stand-alone actuators, the HAPAs can be used as the active material to drive existing displacement amplification schemes to produce piezoelectric actuators of exceptional performance characteristics.