The rapid increase in global population and industrial activities has intensified the discharge of toxic organic pollutants—including antibiotics, dyes, phenolic compounds, and pesticides—into the environment, posing critical threats to both ecosystems and human health. Conventional treatment technologies remain largely inadequate for their complete removal, particularly for pollutants with complex structures and high persistence. Among advanced approaches, photocatalytic systems have emerged as a sustainable and environmentally friendly technology, capable of mineralizing organic pollutants into harmless end products. However, their large-scale application is hindered by inherent limitations such as restricted visible-light activity, low quantum efficiency, and rapid recombination of charge carriers. This mini-review critically examines recent advances aimed at overcoming these bottlenecks, including band gap engineering, metal and non-metal doping, and the incorporation of carbon-based nanomaterials (e.g., CNTs, GO, CQDs). Special emphasis is placed on strategies that enhance photocatalytic activity under visible light, as well as the emerging potential of waste-derived carbon-based photocatalysts for sustainable applications. Finally, key research gaps—such as scalability, long-term stability, and techno-economic feasibility—are discussed to provide future perspectives on the rational design of next-generation photocatalysts.
In this study, carbon quantum dots (CQDs) were synthesized from various lignocellulosic and hemicellulosic biomass precursors via a semi-hydrothermal torrefaction process, and their structural, optical, colloidal, and photocatalytic properties were systematically investigated. Biomass sources including Oriental thuja cone (Thuja orientalis), sawdust, tea waste, apricot kernel shell, walnut shell, sugar beet pulp, hazelnut residue, soybean residue, and chitosan were used to evaluate the effect of precursor composition on CQDs characteristics. UV–Vis spectroscopy confirmed the formation of CQDs in all samples, exhibiting characteristic π–π* and n–π* transitions, while significant variations in absorption intensity and spectral behavior were observed depending on biomass type. Dynamic light scattering and zeta potential analyses revealed that most CQDs exhibited aggregation tendencies, with limited systems showing improved colloidal stability due to electrostatic and/or steric stabilization. The synthesized CQDs were combined with TiO2 and their influence on the photocatalytic degradation of Reactive Black 5 under UV irradiation was investigated. Although high decolorization efficiencies (85–98%) were achieved, total organic carbon removal remained lower (2.6–41.4%), indicating incomplete mineralization. The highest mineralization efficiencies were observed for TiO2 systems modified with sawdust- and thuja-derived CQDs. Overall, the results demonstrate that the photocatalytic performance of CQDs-modified TiO2 systems is governed not only by optical properties but also by surface functionalization, colloidal stability, and charge carrier dynamics. The findings highlight the critical role of biomass composition in determining CQD properties and provide a comparative framework for designing sustainable nanomaterials for environmental applications.
The immobilization of photocatalysts onto biodegradable polymeric supports has emerged as an effective strategy to overcome catalyst recovery limitations associated with conventional slurry photocatalytic systems. In this study, chitosan/TiO2 composite beads with different chitosan properties and TiO2 loadings were synthesized and evaluated for the photocatalytic removal of Reactive Black 5 (RB5), a recalcitrant azo dye commonly encountered in textile wastewater. The effects of chitosan molecular weight, degree of deacetylation, and crosslinking treatment on the structural characteristics and photocatalytic performance of the composite beads were systematically investigated. The synthesized composites were characterized through physical property measurements, point of zero charge (pHpzc) determination, and FTIR analyses. Photocatalytic performance was evaluated under various operational conditions, including pH, catalyst dosage, initial dye concentration, and temperature. Among the prepared materials, the crosslinked chitosan/TiO2 composite bead produced from chitosan with an 85% degree of deacetylation exhibited the highest mineralization efficiency, achieving 76.23% total organic carbon (TOC) removal. FTIR analyses performed before and after treatment indicated that RB5 removal occurred through the combined effects of adsorption and photocatalytic oxidation. The effects of operational parameters revealed that acidic conditions significantly enhanced RB5 removal, while increasing temperature improved reaction kinetics and overall degradation efficiency. Kinetic studies indicated that the photocatalytic degradation process was best described by the pseudo-first-order kinetic model, with correlation coefficients ranging from 0.9841 to 0.9976. Arrhenius analysis yielded an apparent activation energy of 11.76 kJ mol−1, indicating a low energy barrier for the degradation process. The results demonstrate that crosslinked chitosan/TiO2 composite beads are promising, environmentally friendly, and sustainable photocatalytic materials for the treatment of dye-containing wastewater and advanced water purification applications.