In this study, biochar from peanut shells was used to remove Pb(II) ions from aqueous media using a batch method. Adsorption studies were conducted to optimize the adsorption parameters, such as contact time, the initial pH of aqueous media, temperature, initial concentration of lead ions, and the dosage of biochar. The optimum adsorption conditions were found to be contact time: 180 min, initial pH of aqueous media: 5.5 0.02, temperature: 293 K, initial concentration of lead ions: 100 ppm, and the dosage of biochar: 2 g/L. The adsorption yield of Pb(II) ions on the biochar was found to be 89% under these conditions. The experimental results were evaluated by applying the Langmuir, Freundlich, Temkin, and Dubinin-Radushkevich (D-R) isotherm models. We found that the Langmuir isotherm describe the adsorption data very well. The theoretical maximum adsorption capacity (qc) was determined as 56.5 mg/g using the Langmuir isotherm. In the concept of the research, kinetic investigations also were conducted. Pseudo first-order, pseudo second-order, intraparticle diffusion, and Endovich kinetic models were used to calculate the kinetic parameters and determine the ideal mechanism of the adsorption process. It was found that the pseudo second-order model could be used to explain the experimental data. The adsorption was a controlled chemisorption mechanism. The thermodynamic parameters (ΔHº, ΔSº, and ΔGº) were calculated using basic thermodynamic equations, and they indicated that the adsorption process was spontaneous at all temperatures and that the process was exothermic. Consequently, it was concluded that the peanut shell-based biochar can be used as a suitable and economical adsorbent for the removal of Pb(II) ions from aqueous media.
31 July 2021 in Biomass Conversion and Biorefinery
The removal of paracetamol pharmaceutical from the aqueous solution by activated carbon prepared from wood sawdust (WSAC) was studied in the current research. The Response Surface Methodology (RSM) was used to model WSAC paracetamol removal, optimize operational parameters, and determine the impact of operational parameters such as adsorbent dosage, initial concentration of paracetamol, and contact time. According to the results of variance analysis (ANOVA), the quadratic model was statistically significant (P < 0.0001), and the determination coefficient value (R2=0.9847) was high. The high determination coefficient value of the quadratic model indicated that the experimental results adapted well with the predicted results, that is, the model was valid for envisaging the experimental results. The optimum conditions were obtained to be 0.16 g/100 mL WSAC dosage, 11.52 mg/L initial paracetamol concentration, and 90.52 min contact time by the desirability function, resulting in the paracetamol removal of 99.24%. The results of the isotherm studies indicated that the isotherm equations of Langmuir, Temkin, and Dubinin all fit the paracetamol adsorption data. The maximum adsorption capacity (qmax) of WSAC was calculated as 15.90 mg/g using the Langmuir isotherm equation. Kinetic study results revealed that the pseudo-second-order kinetic model adapted well to the paracetamol adsorption data.
The rapid increase in global population and industrial activities has intensified the discharge of toxic organic pollutants—including antibiotics, dyes, phenolic compounds, and pesticides—into the environment, posing critical threats to both ecosystems and human health. Conventional treatment technologies remain largely inadequate for their complete removal, particularly for pollutants with complex structures and high persistence. Among advanced approaches, photocatalytic systems have emerged as a sustainable and environmentally friendly technology, capable of mineralizing organic pollutants into harmless end products. However, their large-scale application is hindered by inherent limitations such as restricted visible-light activity, low quantum efficiency, and rapid recombination of charge carriers. This mini-review critically examines recent advances aimed at overcoming these bottlenecks, including band gap engineering, metal and non-metal doping, and the incorporation of carbon-based nanomaterials (e.g., CNTs, GO, CQDs). Special emphasis is placed on strategies that enhance photocatalytic activity under visible light, as well as the emerging potential of waste-derived carbon-based photocatalysts for sustainable applications. Finally, key research gaps—such as scalability, long-term stability, and techno-economic feasibility—are discussed to provide future perspectives on the rational design of next-generation photocatalysts.
7 September 2020 in Biomass Conversion and Biorefinery