The ideology of ensuring energy‐efficient design and construction of buildings by providing minimum requirements is the core objective of this work. Energy audit was conducted to improve the design of the building with incremental requirements to further enhance the energy efficiency. The Energy Conservation Building Code (ECBC) has been modified extensively over the years, starting from its initial deployment in the year 2011 to its latest modifications in the year 2019. The energy conservation standards in ECBC apply to building envelope, heating ventilation, air conditioning, lighting, service water heating, and electric power distribution. It should also be ensured that all‐electric systems, transformers, energy‐efficient motors, and diesel generators must meet the regulated set of mandatory requirements. From among the various software types that have been approved for ECBC design and application, this study has employed Energy Plus software to simulate the design based on the given input and the selected location. The location that has been chosen for this study was Bhubaneshwar, India. All necessary details ranging from latitude, longitude, weather, time zone, elevation, building area, lighting, heating, cooling, and much more have been covered in the simulation. Utilizing ECBC regulated standards for an energy‐efficient building design has resulted in an increase in the energy savings by 27.4%, and thus, the building qualifies to be regarded as an ECBC compliant building.
25 April 2023 in Journal of Advanced Transportation
Battery charging is a greater challenge in the emerging electric vehicle domain. A newer multistage constant-current (MSCC) charging technique encompassing state-flow control tool-based design is implemented for charging the battery of an electric two-wheeler. MSCC method allows for faster charging and reduced battery degradation per charge. The designed controller incorporates line current power factor correction, thereby limiting the total harmonic distortion (THD) in line current and reactive power. The control strategy for battery charging has been developed using the state flow chart approach for implementing MSCC. The model has been formulated and implemented in MATLAB/Simulink. The proposed control monitors the state-of-charge (SOC) of the battery, age, and thermal behavior due to the charging strategy. The results show that the proposed charging technique with a state flow control approach gives effective and efficient output with reduced THD. Simulation results disclose that the desired parameters are controllable, stable, and effective within the operational limits.
In the rechargeable batteries lithium-ion batteries are now being utilized extensively in a variety of industries, including electric vehicles, drones, and portable electronics. When it comes to such batteries, it is extremely challenging to accurately monitor the state of charge (SOC). In this instance, the EKF method has been implemented with software and hardware demonstration, and the measured value and estimated value have both achieved an error that is within 2% of each other. As a result of executing the static capacity test under dV/dt with the discharging current set to constant and hybrid pulse power characterization test, the figures that are becoming available are being acquired. The approach of optimization assigns a SOC of 90% and 10% for two reference points in the Vcell equation. Additionally, the technique updates the electrical model of the cell by using the derivative of the terminal voltage that was recorded for the cell. With the use of the covariance matrices in the Extended Kalman Filtering equations, the SOC of the battery may be reliably predicted with a level of accuracy that exceeds 98% when compared to conventional techniques of estimation such as coulomb counting. As part of this research, an adaptive model approach for evaluating the state of charge of Li-ion batteries that are becoming older is being developed.
Estimating the state of charge of lithium-ion battery systems is important for efficient battery management systems. This work conducts a thorough evaluation of multiple SOC estimate methods, including both classic approaches Coulomb Counting and extended Kalman filter and machine learning techniques under different load profile on lithium-ion pouch cell. The assessment included a variety of experimental data collected from entire cycles, shallow cycles, and dynamic operations utilizing the Worldwide Harmonized Light Vehicles Test Procedure and Hybrid Pulse Power Characterization tests done from 100% to 10% SOC. While traditional approaches performed well under ordinary settings, they had severe limits during shallow cycling. In contrast, machine learning technologies, notably the random forest method, performed better across all testing conditions. The random forest approach showed outstanding accuracy while minimizing error metrics (RMSE: 0.0229, MSE: 0.0005, MAE: 0.0139) and effectively handled typical issues such as SOC drift and ageing effects. These findings validate random forest as a dependable and robust approach for real-time SOC estimation in battery management systems.
This paper discusses the working of buck-boost converter as power factor correction controller applicable for battery charging in electric vehicles application. This topology will work in buck mode and boost mode of operation reliant on the rectified voltage at input side and battery voltage at load side. This paper presents an informal and effective line frequency current shaping control arrangement used for achieving power factor nearer to unity. It also satisfies the harmonic compliance of source current in accordance to the IEEE519 recommendations. This objective is achieved by active power factor control circuit using continuous conduction mode (CCM) of buck-boost converter implementing adaptable duty cycle control scheme. The control is very simple and gives good performance. The performance of the control scheme is simulated for both open-loop and closed-loop control in Matlab/Simulink environment.
7 March 2020 in International Transactions on Electrical Energy Systems