Carbon capture and storage is one of the potential options for reducing CO2 emissions from coal-fired power plants while preserving their operation. Mathematical modeling was carried out for a one-stage membrane process of carbon dioxide capture from the flue gases of coal-fired power plants using commercial gas separation membranes. Our calculations show that highly CO2-permeable membranes provide similar characteristics with respect to the separation process (e.g., a specific area of membrane and a specific level of electrical energy consumption) despite the significant variation in CO2/N2 and H2O/CO2 selectivity. Regarding the development of processes for the recovery of CO2 from flue gas using membrane technology, ensuring high CO2 permeance of a membrane is more important than ensuring high CO2/N2 selectivity. The presence of water vapor in flue gas provides a higher driving force of CO2 transfer through the membrane due to the dilution of CO2 in the permeate. A cross-flow membrane module operation provides better recovery of CO2 in the presence of water vapor than a counter-current operation.
Today, reducing carbon footprints requires the development of technologies to utilize CO2, particularly by converting it into valuable chemical products. One approach is plasma-catalytic CO2 splitting into CO and O2. The task of separating such a ternary mixture is nontrivial and requires the development of an efficient method. In this paper, we have developed a comprehensive scheme for the separation of a CO2/CO/O2 mixture using membrane technology. The novelty of this work lies in the development of a complete scheme for separating the products of plasma-chemical decomposition of CO2 to produce a CO concentrate. The calculations utilized the principle of a reasonable balance between the recovery rate and the energy consumption of the separation process. This scheme allows production of a CO stream with a purity of 99%. To achieve this goal, we have proposed the sequential use of CO2-selective membranes based on polysiloxane with oligoethyleneoxide side groups (M-PEG), followed by polysulfone (PSF) hollow-fiber membranes to separate CO and O2. For these membranes, we measured the CO permeability for the first time and obtained the selectivity for CO2/CO and O2/CO. The potential of membrane separation was demonstrated through a three-stage process, which includes recycling of the CO removal stream and concentration after CO2 plasmolysis. This process was calculated to yield a highly pure CO stream containing 99 mol% with a recovery rate of 47.9–69.4%. The specific energy consumption for the separation process was 30.31–0.83 kWh per 1 m3 of feed mixture, and the required membrane area was between 0.1 m2 for M-PEG and 42.5–107 m2 for PSF, respectively.
Despite the development of nuclear and alternative energy, thermal power plants operating by burning fossil fuels (coal, petroleum products or natural gas) will retain a significant share in the energy balance for a long time. In this regard, it is of particular interest to reduce CO2 emissions from the combustion of organic fuels through its capture and subsequent use or burial. In our work, mathematical modeling of the two-stage process of membrane extraction of CO2 from the flue gases of a thermal power plant was carried out, taking into account the presence of water vapor and various operating modes of the membrane module. We used commercially available polymer membranes for gas separation in our simulations. The calculations showed: Taking into account the presence of water vapor makes it possible to reduce the required membrane area by 1.6 times; For the degree of CO2 extraction < 80% in one stage, cross-flow and counter-current modes provide equal indicators for the required membrane area, and the co-current mode turns out to be less advantageous already with a degree of CO2 extraction > 60%. In this regard, in the area of low CO2 extraction values at the first stage, any flow organization mode in the membrane module can be selected, and in the high area, a counter-current has a slight advantage over the cross-flow mode; An optimal combination of membrane areas in the first and second stages is shown to achieve the maximum CO2 concentration in the product stream; Polaris Gen-2 membranes provide the best performance after two-stage separation: the CO2 content in the product stream was > 85 mol% and > 90 mol% with a total recovery rate of 80 and 50%, respectively; PolyActive and PPO membranes provide equal indicators for the CO2 content in the product stream, but in the use of PolyActive, the required membrane area is 2.3 times less.