To address the impacts of climate change, it is imperative to significantly decrease anthropogenic greenhouse gas emissions. Biomass-based chemicals and fuels will play a crucial role in substituting fossil-based feedstocks and reducing emissions. Gasification-based biomass conversion processes with catalytic synthesis producing chemicals and fuels (Biomass-to-X, BtX) are an innovative and well-proven process route. Since biomass is a scarce resource, its efficient utilization by maximizing product yield is key. In this review, the electrification of BtX processes is presented and discussed as a technological option to enhance chemical and fuel production from biomass. Electrified processes show many advantages compared to BtX and electricity-based processes (Power-to-X, PtX). Electrification options are classified into direct and indirect processes. While indirect electrification comprises mostly the addition of H₂ from water electrolysis (Power-and-Biomass-to-X, PBtX), direct electrification refers to power integration into specific processing steps by converting electricity into the required form of energy such as heat, electrochemical energy or plasma used (eBtX). After the in-depth review of state-of-the-art technologies, all technologies are discussed in terms of process performance, maturity, feasibility, plant location, land requirement, and dynamic operation. H₂ addition in PBtX processes has been widely investigated in the literature with process simulations showing significantly increased carbon efficiency and product yield. Similar studies on direct electrification (eBtX) are limited in the literature due to low technological maturity. Further research is required on both, equipment level technology development, as well as process and system level, to compare process options and evaluate performance, economics, environmental impact and future legislation.

The gasification of biomass can be coupled to a downstream methanation process that produces synthetic natural gas (SNG). This enables the distribution of bioenergy in the existing natural gas grid. A process model is developed for the small-scale production of SNG with the use of the software package Aspen Plus (Aspen Technology, Inc., Burlington, MA, USA). The gasification is based on an indirect gasifier with a thermal input of 500 kW. The gasification system consists of a fluidized bed reformer and a fluidized bed combustor that are interconnected via heat pipes. The subsequent methanation is modeled by a fluidized bed reactor. Different stages of process integration between the endothermic gasification and exothermic combustion and methanation are considered. With increasing process integration, the conversion efficiency from biomass to SNG increases. A conversion efficiency from biomass to SNG of 73.9% on a lower heating value basis is feasible with the best integrated system. The SNG produced in the simulation meets the quality requirements for injection into the natural gas grid. Copyright © 2012 John Wiley & Sons, Ltd.