Lithium batteries are electrochemical devices that are widely used as power sources. This history of their development focuses on the original development of lithium-ion batteries. In particular, we highlight the contributions of Professor Michel Armand related to the electrodes and electrolytes for lithium-ion batteries.

Most of the current commercialized lithium batteries employ liquid electrolytes, despite their vulnerability to battery fire hazards, because they avoid the formation of dendrites on the anode side, which is commonly encountered in solid-state batteries. In a review two years ago, we focused on the challenges and issues facing lithium metal for solid-state rechargeable batteries, pointed to the progress made in addressing this drawback, and concluded that a situation could be envisioned where solid-state batteries would again win over liquid batteries for different applications in the near future. However, an additional drawback of solid-state batteries is the lower ionic conductivity of the electrolyte. Therefore, extensive research efforts have been invested in the last few years to overcome this problem, the reward of which has been significant progress. It is the purpose of this review to report these recent works and the state of the art on solid electrolytes. In addition to solid electrolytes stricto sensu, there are other electrolytes that are mainly solids, but with some added liquid. In some cases, the amount of liquid added is only on the microliter scale; the addition of liquid is aimed at only improving the contact between a solid-state electrolyte and an electrode, for instance. In some other cases, the amount of liquid is larger, as in the case of gel polymers. It is also an acceptable solution if the amount of liquid is small enough to maintain the safety of the cell; such cases are also considered in this review. Different chemistries are examined, including not only Li-air, Li–O₂, and Li–S, but also sodium-ion batteries, which are also subject to intensive research. The challenges toward commercialization are also considered.

Rechargeable batteries are essential elements for many applications, ranging from portable use up to electric vehicles. Among them, lithium-ion batteries have taken an increasing importance in the day life. However, they suffer of several limitations: safety concerns and risks of thermal runaway, cost, and high carbon footprint, starting with the extraction of the transition metals in ores with low metal content. These limitations were the motivation for an intensive research to replace the inorganic electrodes by organic electrodes. Subsequently, the disadvantages that are mentioned above are overcome, but are replaced by new ones, including the solubility of the organic molecules in the electrolytes and lower operational voltage. However, recent progress has been made. The lower voltage, even though it is partly compensated by a larger capacity density, may preclude the use of organic electrodes for electric vehicles, but the very long cycling lives and the fast kinetics reached recently suggest their use in grid storage and regulation, and possibly in hybrid electric vehicles (HEVs). The purpose of this work is to review the different results and strategies that are currently being used to obtain organic electrodes that make them competitive with lithium-ion batteries for such applications.

Among the compounds of the olivine family, LiMPO₄ with M = Fe, Mn, Ni, or Co, only LiFePO₄ is currently used as the active element of positive electrodes in lithium-ion batteries. However, intensive research devoted to other elements of the family has recently been successful in significantly improving their electrochemical performance, so that some of them are now promising for application in the battery industry and outperform LiFePO₄ in terms of energy density, a key parameter for use in electric vehicles in particular. The purpose of this review is to acknowledge the current state of the art and the progress that has been made recently on all the elements of the family and their solid solutions. We also discuss the results from the perspective of their potential application in the industry of Li-ion batteries.

This review article presents the literature survey on radio frequency (RF)-magnetron sputtered LiCoO₂ thin films used as cathode materials in all-solid-state rechargeable lithium microbatteries. As the process parameters lead to a variety of texture and preferential orientation, the influence of the sputtering conditions on the deposition of LiCoO₂ thin films are considered. The electrochemical performance is examined as a function of composition of the sputter Ar/O₂ gas mixture, gas flow rate, pressure, nature of substrate, substrate temperature, deposition rate, and annealing temperature. The state-of-the-art of lithium microbatteries fabricated by the rf-sputtering method is also reported.

This review article presents a survey of the literature on pulsed laser deposited thin film materials used in devices for energy storage and conversion, i.e., lithium microbatteries, supercapacitors, and electrochromic displays. Three classes of materials are considered: Positive electrode materials (cathodes), solid electrolytes, and negative electrode materials (anodes). The growth conditions and electrochemical properties are presented for each material and state-of-the-art of lithium microbatteries are also reported.