This work solves the task of developing a fuzzy logic model for evaluating the energy efficiency of vehicles as part of the control unit of an intelligent transport system. Within the scope of this study, the previously obtained morphological model of the transport system was modified. A mathematical dependence is proposed to determine the vehicle energy efficiency indicator. This dependence characterizes the energy consumption of the vehicle in relation to the energy consumption of the vehicle under the reference operating conditions. Synthesis of system configurations was performed, and procedures were used to transform the morphological formulas of the received configurations into a base of logical derivation rules. Parameters of the membership functions of system parameters to fuzzy terms of the area of their definition are defined. Based on the results of the morphological analysis, two fuzzy derivation models were developed: the Mamdani type and the Sugeno type. The accuracy of the modeling was evaluated using different defuzzification algorithms in the control sample. The most accurate model is the fuzzy Mamdani model, with an accuracy value of 98.8%. Using the developed model, the nature of the mutual influence of the transport system parameters on the level of vehicle efficiency was assessed. The results of the study can be used to justify the choice of the vehicle under the specified operating conditions and in the settlement design of the road infrastructure.
The paper studies the problem of assessing the vehicle energy efficiency on the streets of urban road network. As a result of morphological analysis of the system “Vehicle—Traffic flow—Road—Traffic Environment” 18 significant morphological attributes of its functional elements, that affect the energy efficiency of vehicles, were identified. Each attribute is characterized by 3–6 implementation variants, which are evaluated by the relevant quantitative or qualitative parameters. The energy efficiency of vehicles is determined by the criteria of their energy consumption considering the vehicle category, type of energy unit, mode of vehicle movement and adjustment factors—road, climatic and others. The input parameters values of the system in the process of traffic flow on the linear fragments of streets and road networks of the cities of Ukraine and Poland were measured. The set of independent system parameters is determined by applying the Farrar-Glober method based on statistical estimates. The specified set is the basis of the studied system and is formed of 10 independent input parameters. The presence in the basis of parameters that correspond to the morphological features of all four functional elements, confirmed the importance of these elements of the system. The mathematical dependence of the impact of vehicle characteristics, traffic flow, road and environment on vehicle energy efficiency is built. The standard deviation of the model values from the tabular ones equals . Relative standard deviation equals . The results of the study could be used in the development of new and optimization of existing intelligent traffic control systems of urban transport.
The use of alternative fuels remains an important factor in solving the problem of reducing harmful substances caused by vehicles and decarbonising transport. It is also important to ensure the energy efficiency of vehicle power plants when using different fuels at a sufficient level. The article presents the results of theoretical and experimental studies of the conversion of diesel engine to alternative fuels with hydrogen admixtures. Methanol is considered as an alternative fuel which is a cheaper alternative to commercial diesel fuel. The chemical essence of improving the calorific value of alternative methanol fuel was investigated. Studies showed that the energy effect of burning an alternative mixture with hydrogen additives exceeds the effect of burning the same amount of methanol fuel. The increase in combustion energy and engine power is achieved as a result of heat from efficient use of the engine exhaust gases and chemical conversion of methanol. An experimental installation was created to study the work of a converted diesel engine on hydrogen–methanol mixtures and thermochemical regeneration processes. Experimental studies of the energy and environmental parameters of diesel engine converted to work on an alternative fuel with hydrogen admixtures have shown that engine power increases by 10–14% and emissions of harmful substances decrease.
25 January 2023 in Communications - Scientific letters of the University of Zilina
The efficiency of the public transport use is a complex indicator formed from a set of partial assessments of its economic, technical and environmental efficiency. Special attention must be paid to the evaluation of efficiency based on energy ...
Public transport is an important part of sustainable economic development, sustainable cities, and communities. Reducing energy consumption in public transport can be achieved through better organisation of the transport system, changes in infrastructure, the use of new energy-efficient means of transport, and other ways to achieve intelligent mobility. The operation of a city bus involves frequent stops. These stops are due to the need to exchange passengers at bus stops and traffic conditions. Each stop and the subsequent acceleration process require additional energy consumption. In this paper, an analysis of bus operation within the Rzeszów ITS on a selected route is carried out to determine the energy consumption in these special modes. First, the number and duration of stops were determined based on data recorded during the bus operation using the tracker. Then, taking into account the idle fuel consumption and the energy consumption required to reach a set speed, the total energy consumption associated with the stops was determined. The results obtained on the selected route indicate a significant share of energy associated with stops at bus stops and outside bus stops in total fuel consumption. These shares are about 26.2% and about 42.5%, respectively. The opportunity to improve the energy efficiency of the city bus on the route due to the reduction of stops at bus stops by introducing on-demand stops as one of the elements of ITS has been evaluated. The number of stops related to traffic conditions can be reduced by further improving traffic management and measures to modify urban infrastructure.
Public transport still uses vehicles powered by fossil fuels. Replacing the fleet with zero-emission vehicles will take many years. During this period, it is still necessary to carry out work aimed at reducing energy consumption and thus the emission of toxic substances into the atmosphere. An important part of this work is the study of the relationship between energy demand of buses with different power plants and urban traffic conditions. These conditions include traffic intensity, average and maximum speeds, and number of stops. The VSP (Vehicle-Specific Power) model is useful in research on this relationship. In this article, such research was carried out using data from public bus monitoring and data provided by the city authorities of Rzeszów. In the first stage, a VSP model was created and tuned for three buses with different power plants operating on selected routes. Then, as a result of a large number of simulation processes, the impact of the average speed on the energy demand was determined. The results of the conducted research can be used in the modernization or planning of public transport networks and the modification of road infrastructure. All these activities should contribute to reducing energy consumption and environmental pollution.