Активна розбудова інфраструктури населених пунктів – один із важливих елементів у концепції їхнього розвитку, а візуалізація цих змін шляхом складання оновлених планів та наповнення геопросторових баз даних територіальної громади оновленою інформацією – важлива складова системи управління земельними ресурсами. В умовах децентралізації влади та адміністративної реформи в Україні контроль за змінами рекреаційного ландшафту переймають на себе територіальні громади. Отож, методи проведення моніторингу земель рекреаційного призначення та наповнення геопросторових баз даних потребують постійного вдосконалення. Саме з погляду оперативного отримання актуальної інформації щодо використання земельного фонду методи дистанційного зондування є одними з найефективніших. У дослідженні розкрито методи дистанційного зондування, які використано з метою моніторингу використання земель на муніципальному рівні, зокрема земель рекреаційного призначення на території с. Солотвино. Передусім зосереджено увагу на виявленні змін, які відбуваються під дією природного та антропогенного впливів, та, як наслідок – змін в інфраструктурі землекористування, що позначатиметься на майбутніх управлінських рішеннях. Зазначено, що Солотвино – селище в Закарпатській області, розташоване в Мармароській котловині на правому березі Тиси. Відоме як курорт місцевого значення, який функціонує в умовах розвитку негативних геологічних проявів. Курортно-рекреаційна діяльність на території селища поширюється й на ділянки, які потребують постійного контролю й можуть становити потенційну загрозу для людей та спричинити руйнування інфраструктури. Під час досліджень територій загалом і її рекреаційної інфраструктури зокрема часто використовують дистанційно отримувану інформацію щодо місцевості, як-от космічні та аерознімки. Дослідження території с. Солотвино на муніципальному рівні (42 км2) виконане з допомогою ГІС QGIS за даними геопорталу ESA WorldCover 10 m. Зоною інтересу на локальному рівні дослідження обрано рекреаційну ділянку в південній частині озера Кунігунда, на якій відносно нещодавно розпочались господарська діяльність і надання рекреаційних послуг. Розроблено методику для оцінки змін просторового розвитку курорту Солотвино за останні роки на основі геоінформаційних моделей, створених за матеріалами космічних знімань та аерознімання із БПЛА.
The work aims to analyze and study the possibilities of using “Cetus” unmanned aerial vehicle (UAV) for performing topographic aerial surveys. The authors developed and tested aircraft-type UAV for topographic aerial photography. The studies were conducted on a specialized landfill, at which there is an appropriate number of situational points whose coordinates are determined with high accuracy. These points were used as both reference and control points. The obtained UAV aerial survey materials were subjected to a phototriangulation process to determine the orientation elements and to analyze, first and foremost, the angular orientation elements. The surveying was carried out on a mountainous territory, where the spatial coordinates of 37 situational points were determined by the method of ground-based GPS survey with an average accuracy of up to 0.05 m. These points were used as reference and control points. Aerial photography was performed in such a way that the scale of the images was as uniform as possible. The design solutions implemented in the Cetus UAV provide all the possibilities to perform aerial surveys of territories in strict compliance with the projected flight parameters. UAV equipment provides the necessary real-time correction of the position of the aerial camera. At the same time the optimum straightness of routes, stability of scales and mutual overlapping of pictures is reached. Regarding the accuracy of obtaining the spatial coordinates of the points of terrain objects, using “Cetus” UAV surveys, plans can even be made on a scale of even 1: 1000. As a result of the creation of the UAV “Cetus”, it became possible to perform the topographic aerial survey of the territories and to create large-scale orthophotos that fully meet the instructions. As a result of testing the “Cetus” UAV, it can be used in production processes when drawing up topographic plans for a large-scale series: 1: 1000 – 1: 5000, which will significantly save the cost of performing topographic work.
This work aims to study the vertical planning method for the terrain area as part of the process of construction geodetic support. Such planning will be carried out based on the aerial survey data from UAVs, which allow the creation of a high-quality digital elevation model (DEM) with sufficient node density for reliable surface terrain modelling. During the study, we test the hypothesis of the possibility of using archival aerial photographs from UAVs to model the terrain of the local area. Both the actual achievable accuracy of terrain modeling in the course of photogrammetric processing of archived aerial photographs, and methods for creating a polygonal terrain model using input spatial data in the form of clouds of 3D points of a given density require analysis. To do this, we will perform comparisons of the accuracy of calculating earth masses, carried out based on the digital triangulation elevation models (TIN). These models were based on different algorithms for creating Delaunay triangulation with different degrees of 3D point sparsity.We proposed to use sparsity of dense clouds of points representing the surface of the terrain and which were obtained by the photogrammetric method. Computer terrain modelling and calculation of vertical planning parameters were performed by us for the area with flat terrain at angles up to 3.5 degrees. We evaluated the potential of archived UAV aerial photographs and algorithms for creating Delaunay triangulation at different densities of its nodes for calculating the volumes of earth masses.
This paper presents a methodological framework for integrating UAV-based photogrammetry and GIS technologies to generate a high-accuracy digital elevation model (DEM) for urban land-use planning. The study was conducted in an urbanized area characterized by heterogeneous topography, mixed vegetation cover, and fragmented land use, which complicate high-resolution terrain modeling. UAV surveys were performed using multiple photogrammetric blocks with centimeter-level ground sample distance and a dense ground control network supported by geoid-based height corrections. The resulting DEM was independently validated using control points derived from large-scale topographic data. The achieved vertical accuracy (RMSE ≈ 0.25 m) confirms the applicability of UAV-derived DEMs for large-scale mapping (1:1000–1:2000) and urban spatial analysis. Unlike studies focused on runoff simulation, this work emphasizes the accuracy-controlled generation and validation of DEMs as a primary spatial dataset for urban planning applications. The results demonstrate that DEM accuracy depends strongly on flight planning, ground control distribution, and hybrid automatic–manual point cloud refinement.