This article deals with the potential use of by-products from Třinecké železárny company—namely steelworks slag and spent foundry sand (SFS)—as an alternative to natural aggregate in the production of high-strength concrete. The aim of the study was to design and experimentally verify two concrete mixtures. For the first mixture (Mixture 1), natural aggregate was fully replaced by steelworks slag. For the second mixture (Mixture 2), the replacement was made by a combination of steelworks slag and SFS in the same volume ratio. The results have shown that Mixture 1 achieved a strength class of C70/85 and was classified as high-strength concrete. In contrast, Mixture 2, despite optimization of the composition, only achieved a strength class of C35/40, which does not allow for its classification as high-strength concrete.

This article deals with the use of steel slag from secondary (ladle) metallurgy. It explains how slag is formed and how it is classified. It is focused on the benefits of using slag. It describes the chemical and mechanical properties of slag and suggests the directions for research into the use of this raw material.