Based on the biaxial experiment data of the membrane material under hot and cold conditions, the mechanical properties calculation model of envelope material was established with consideration of the effects of varying stress ratios, stress magnitudes and temperatures on the mechanical properties of near-space airship material. Using the heat source model, Computational Fluid Dynamics (CFD) simulation, User-Defined Function (UDF), structural finite element analysis software and the user subroutine of an airship to define the behaviour of fabric material, the fluid–structure–thermal coupling model of airship envelopes was established. In addition, a near-space airship was selected as the research subject to calculate the diurnal temperature differences during the summer solstice and analyse the diurnal temperature distribution of the envelope. Under controlled environmental conditions, the deformation law of the near-space airship under the influence of fluid–structure–thermal coupling was calculated and summarised. The present fluid–solid–thermal coupling model takes into account the anisotropy of materials, temperature, stress magnitude, stress ratio and other influencing factors, which can more accurately reflect and predict the stress–strain distribution and the deformation law of near-space airships.
Purpose. To investigate interdevice agreement among corneal topography/ray-tracing aberrometry (iTrace), partial coherence interferometry (IOLMaster), and Scheimpflug imaging (Pentacam) for the measurement of corneal astigmatism. Methods. The analysis included 90 eyes of 90 subjects without ocular disease. The main outcome measures were corneal cylinder power and axis of astigmatism. All corneal astigmatism measurements were converted to two perpendicular components by using vector analysis. Interdevice agreement was assessed using Bland–Altman analysis, paired sample t-test, and one-way analysis of variance. Results. No significant interdevice difference existed in the astigmatism magnitude, cardinal component, and oblique component (all ). On comparing iTrace wavefront and simulated keratometry (SimK) astigmatism, significant differences were observed in the astigmatism magnitude and oblique component (both ), but not in the cardinal component (). On comparing Pentacam pupil 3 mm and corneal vertex 3 mm axial astigmatism, significant difference was observed in the astigmatism magnitude (), but not in the cardinal and oblique components (both ). Conclusions. The iTrace, IOLMaster, and Pentacam devices could be used interchangeably for corneal astigmatism measurement. However, the measurement difference in iTrace wavefront and SimK astigmatism and Pentacam pupil 3 mm and vertex 3 mm axial astigmatism should be considered in clinic practice.
An optimal calculation method for the mechanical properties of near-space capsule materials was proposed. First, biaxial tensile tests under low tensile ratios were carried out on the envelope materials of a near-space airship. The experimental results showed that the values of the elastic modulus and Poisson’s ratio, which are significantly affected by the warp and weft stresses, were not constant. Second, the elastic modulus and Poisson’s ratio of the near-space airship were obtained by using the traditional calculation method, and the limitations of this method were discussed. Third, an optimal calculation model for the elastic modulus and Poisson’s ratio of airship envelopes was proposed. The strain calculated by the proposed optimization model could be effectively correlated to the strain measured by the experiment. Then, through the user-defined subroutine of the finite element method and the elastic modulus and Poisson’s ratio calculated by the proposed optimization, the strain of the finite element simulation was obtained. The average error between the simulation results and the experimental values was approximately 8.21% (warp) and 8.41% (weft). The proposed method can consider the nonlinear changes of the elastic modulus and Poisson’s ratio of membrane material under different stress ratios and predict the force and deformation of the airship’s capsule more accurately, which is adaptable to engineering applications.
19 August 2022 in Journal of Shanghai Jiaotong University (Science)
The flight performance of the airship is closely related to the attitude control. For the stability of the station-keeping and the rapidity and accuracy of the trajectory tracking, it is necessary to study the attitude control of the airship. This paper proposes a strategy including two parties. First, a novel control mechanism combining moving-mass and tail vector thrust is proposed, and the airship mathematical model is introduced briefly. Second, active disturbance rejection controller (ADRC) is introduced which is developed from classical proportion–integration–differentiation (PID) controller. Considering the special working environment of stratospheric airship, the wind field is added to the simulation as external disturbance. The results show that the system is stable which can track any expected angle of pitch and yaw directions with small overshoot and rise time. In general, with or without the disturbance of 4 m/s wind field, the ADRC performs better than PID controller.
Because of the huge volume and inflated membrane structure of stratosphere airship, the deformation of stratosphere airship is very sensitive to the change of environment conditions such as wind, temperature and so on. The influence of deformation on manipulation and control is very remarkable. So, during the course of building flight dynamic model of the flexible airship, the added-mass matrix of deformation is very important part in the state equations of dynamic models. For obtaining the accurate added-mass matrix of different flexible airship, we proposed an approach that can calculate the added-mass matrix of a flexible airship with arbitrary geometry shape by the panel method. Through the comparison of results of computation and theory for ellipsoid of revolution and the flexible Skyship-500 airship, the proposed method can calculate the added-mass matrix for arbitrary geometric shape very accurately.