Manufacturing and assembly (geometric) errors affect the positioning precision of manipulators. In six degrees-of-freedom (6DOF) manipulators, geometric error effects can be compensated through suitable calibration procedures. This, in general, is not possible in lower-mobility manipulators. Thus, methods that evaluate such effects must be implemented at the design stage to determine both which workspace region is less affected by these errors and which dimensional tolerances must be assigned to match given positioning-precision requirements. In the literature, such evaluations are mainly tailored on particular architectures, and the proposed techniques are difficult to extend. Here, a general discussion on how to take into account geometric error effects is presented together with a general method to solve this design problem. The proposed method can be applied to any nonoverconstrained architecture. Eventually, as a case study, the method is applied to the analysis of the geometric error effects of the translational parallel manipulator (TPM) Triflex-II.
25 February 2019 in Journal of Mechanisms and Robotics
The extended Jacobian is a technique for solving the redundancy of redundant robots. It is based on the definition of secondary tasks, through constraint functions that are added to the mapping between joint rates and end-effector's twist. Several approaches showed its potential, applications, and limitations. In general, the constraint functions are a linear combination of basic functions with constant coefficients. This paper proposes the use of adaptive coefficients in such functions by using the conditioning index of the extended Jacobian as a quality measure. A good conditioning index of the extended Jacobian keeps the robot far from singularities and contributes to the solution of the inverse kinematics. In this paper, initially, the extended Jacobian and the proposed algorithm are discussed, and then, two tests in different circumstances are presented in order to validate the proposal.
Robotic Total Stations (RTS) are fully automated theodolites with electronic distance measurement (EDM) that include a number of additional tools (e.g., camera, laser rangefinder, onboard computer, and tracking software, etc.) enabling them to work autonomously. The added tools make RTSs able to track mobile targets on civil structures thus opening to the use of RTSs in structural monitoring. Unfortunately, the available RTSs are able to track a target up to a motion rate of 3 Hz. Reducing mobile masses is a viable design strategy for extending this frequency border. Such a strategy is pursued in this study by proposing the use of parallel pointing systems (PPS) as basic mechanical architectures for RTSs. The literature on PPSs is reviewed and the applicable PPS architectures are selected. Successively, the selected architectures are sized according to RTSs’ functional requirements, and the positioning precision of the sized mechanisms is evaluated. The result of this study is that there are three PPS architectures suitable for RTSs, whose detailed comparison is also presented.
Rigid-body displacements obtained by combining spatial translations and rotations around axes whose direction is fixed in the space are named Shoenflies’ motions. They constitute a 4-dimensional (4-D) subgroup, named Shoenflies’ subgroup, of the 6-D displacement group. Since the set of rotation-axis’ directions is a bi-dimensional space, the set of Shoenflies’ subgroups is a bi-dimensional space, too. Many industrial manipulations (e.g., pick-and-place on a conveyor belt) require displacements that belong to only one Schoenflies’ subgroup and can be accomplished by particular 4-degrees-of-freedom (4-DOF) manipulators (Shoenflies-motion generators (SMGs)). The first author has recently proposed a novel parallel SMG of type CRS-RRC1. Such SMG features a single-loop architecture with actuators on the base and a simple decoupled kinematics. Here, firstly, an organic review of the previous results on this SMG is presented; then, its design is addressed by considering its kinetostatic performances. The adopted design procedure optimizes two objective functions, one (global conditioning index (GCI)) that measures the global performance and the other (CImin) that evaluates the worst local performance in the useful workspace. The results of this optimization procedure are the geometric parameters’ values that make the studied SMG have performances comparable with those of commercial SMGs. In addition, a realistic 3D model that solves all the manufacturing doubts with simple and cheap solutions is presented.
The presence of collaborative robots in industrial environments requires that their control strategies include collision avoidance in the generation of trajectories. In general, collision avoidance is performed via additional displacements of the kinematic chain that make the robot move far from the objects that are occasionally inserted into its safety workspace. The variability of the coordinates of the collision points inside the safety volume leads to abrupt movements for the robot. This paper presents a general method for smoothing abrupt movements in robots with one degree of redundancy for collision-avoidance trajectories, employing a second-order digital filter designed with adjustable critical damping. The method is illustrated by applying it to a redundant robot with a spherical–revolute–spherical type (SRS-type) kinematic chain, which is a benchmark used to test the algorithms ideated for solving this problem. This paper also presents an alternative algorithm for the inverse kinematics of the SRS-type robot and the computational experiments that show the collision avoidance proposal’s performance and its properties through graphical results.