A systematic methodology is applied in an effort to select optimum values for the suspension damping and stiffness parameters of two degrees of freedom quarter-car models, subjected to road excitation. First, models involving passive suspension dampers with constant or dual rate characteristics are considered. In addition, models with semi-active suspensions are also examined. Moreover, special emphasis is put in modeling possible temporary separations of the wheel from the ground. For all these models, appropriate methodologies are employed for capturing the motions of the vehicle resulting from passing with a constant horizontal speed over roads involving an isolated or a distributed geometric irregularity. The optimization process is based on three suitable performance criteria, related to ride comfort, suspension travel and road holding of the vehicle and yielding the most important suspension stiffness and damping parameters. As these criteria are conflicting, a suitable multi-objective optimization methodology is set up and applied. As a result, a series of diagrams with typical numerical results are presented and compared in both the corresponding objective spaces (in the form of classical Pareto fronts) and parameter spaces.

An appropriate substructuring methodology is applied in order to study the dynamic response of very large scale mechanical systems. The emphasis is put on enabling a systematic study of dynamical systems with nonlinear characteristics, but the method is equally applicable to systems possessing linear properties. The accuracy and effectiveness of the methodology are illustrated by numerical results obtained for example vehicle models, having a total number of degrees of freedom lying in the order of a million or even bigger. First, the equations of motion of each component are set up by applying the finite element method. The order of the resulting models is so high that the classical substructuring methodologies become numerically ineffective or practically impossible to apply. However, the method developed overcomes these difficulties by imposing a further, multilevel substructuring of each component, based on the sparsity pattern of the stiffness matrix. In this way, the number of the equations of motion of the complete system is substantially reduced. Consequently, the numerical results presented demonstrate that besides the direct computational savings, this reduction in the dimensions enables the application of numerical codes, which capture response characteristics of dynamical systems sufficiently accurate up to a prespecified level of forcing frequencies. The study concludes by investigating biodynamic response of passenger-seat subsystem models coupled with complex mechanical models of ground vehicles resulting from deterministic or random road excitation.