Electroactive biomaterials can influence the microenvironment between cells and a material’s surface by controlling surface electrical signals, thereby affecting cellular physiological activities. As the most commonly used ferroelectric polymer, Poly(vinylidene fluoride-trifluoroethylene) (PVTF) has attracted widespread attention due to its good stability, biocompatibility and mechanical properties. However, it has limitations such as non-degradability. In this study, PVTF nanoparticles (PVTF NPs), prepared using a phase separation method, were compounded with polylactide (PLA) to prepare PVTF NPs/PLA composite membrane (PN/PLA), which simultaneously achieved electroactivity and degradability. PVTF NPs containing ferroelectric β phase were evenly distributed on the PLA substrate, forming negative potential spots through corona polarization. The PLA substrate gradually degraded in a simulated body fluid environment. The negative surface potential provided by PVTF NPs in PN/PLA enhanced the adhesion, proliferation, and early-stage osteogenic differentiation of bone marrow mesenchymal stem cells (BMSCs). The electrical bioactivity and degradability could be joined together in this study, which is promising for tissue regeneration biomaterials, such as guided bone regeneration membrane.
Surface morphology and electrical characteristics are key factors affecting cell–material interactions on electroactive polymer films, but their coupled effects remain unclear. In this study, P(VDF-TrFE) nanofiber-clustered films were fabricated using an anodic aluminum oxide (AAO) template-assisted molding method, and their surface electrical properties were subsequently tailored by corona poling. The nanofibrous structure was formed without substantially disrupting the characteristic polar β phase. Compared with the planar film, the water contact angle (WCA) of the nanofiber-clustered film increased from 74.8° to 132.5°, indicating markedly enhanced hydrophobicity. Furthermore, corona poling increased the magnitude of the piezoelectric coefficient (|d33|) and altered the surface potential state. Protein adsorption and cell studies further showed that polarized nanofiber-clustered surfaces exhibited greater protein adsorption, more extensive cell spreading, and higher CCK-8 signals and alkaline phosphatase (ALP) activity. These results indicate that the biological interfacial response of P(VDF-TrFE) films is regulated by surface morphology, wettability, and polarization-induced electrical characteristics. This work provides insight into the combined roles of nanofiber-clustered topography and electrical characteristics in regulating cell-material interactions on P(VDF-TrFE) surfaces.
Bioelectricity plays a vital role in regulating cellular behavior. During the process of tissue repair and regeneration, surface electrical signals provided by biomaterials are found to be helpful. The characteristics of these electrical signals typically vary depending on the specific tissue repair requirements. In this study, zinc oxide nanorod (ZNR) arrays were loaded onto a poly(vinylidene fluoride-trifluoroethylene) (PVTF) substrate via the hydrothermal method. The nanorods were subsequently tilted by uniaxial stretching to form a ZNR/PVTF composite film with in-plane, horizontally aligned ZNRs along the stretching direction on the surface. The distribution of ZNRs created a heterogeneous potential across the PVTF substrate. Under ultraviolet (UV) irradiation, the surface potential of the ZNRs increased by approximately 76 mV due to a photoelectric response, enabling the formation of an adjustable millivolt-level surface potential. After corona polarization, the dipoles within the PVTF were aligned to achieve piezoelectric properties. The existence of oriented surface ZNRs enhanced the piezoelectric response of the ZNR/PVTF film, allowing for volt-level dynamic electrical signals through a force-voltage coupling mechanism. The output voltage increased from 1.32 V (PVTF) to 2.42 V (ZNR/PVTF) under the same 30° bending condition. Moreover, the ZNR/PVTF film exhibited excellent short-term biocompatibility toward bone marrow stem cells (BMSCs). Overall, this work presents an effective strategy for generating multiscale electrical signals through external field applications, demonstrating strong potential for tissue repair and regeneration.