Compound floods are an active area of research in which the complex interaction between pluvial, fluvial, coastal and groundwater flooding are analyzed. A number of studies have simulated the compound flooding impacts of precipitation, river discharge and storm surge variables with different numerical models and linking techniques. However, groundwater flooding is often neglected in flood risk assessments due to its sporadic frequency (as most regions have water tables sufficiently low that do not exacerbate flooding conditions), isolated impacts and considerably lower severity with respect to other types of flooding. This paper presents a physics-based, loosely coupled modeling framework using FLO-2D and MODFLOW-2005 that is capable of simulating surface–subsurface water interactions. FLO-2D, responsible for the surface hydrology and infiltration processes, transfers the infiltration volume as recharge to MODFLOW-2005 until the soil absorption capacity is exceeded, while MODFLOW-2005 returns exchange flow to the surface when the groundwater heads are higher than the surface depth. Three events characterized by short-duration intense precipitation, average tide levels and unusually high water table levels are used to assess the relevance of groundwater flooding in the Arch Creek Basin, a locality in North Miami particularly prone to flooding conditions. Due to limitations in water level observations, the model was calibrated based on properties that have experienced repetitive flooding losses and validated using image-based volunteer geographic information (VGI). Results suggest that groundwater-induced flooding is localized, and high groundwater heads influence pluvial flooding as the shallow water table undermines the soil infiltration capacity. Understanding groundwater flood risk is of particular interest to low-elevation coastal karst environments as the sudden emergence of the water table at ground surface can result in social disruption, adverse effects to essential services and damage to infrastructure. Further research should assess the exacerbated impacts of high tides and sea level rise on water tables under current and future climate projections.
Hydraulic modeling is a fundamental tool for managing and mitigating flood risk. Developing low resolution hydraulic models, providing consistent inundation simulations with shorter running time, as compared to high-resolution modeling, has a variety of potential applications. Rapid coarse resolution flood models can support emergency management operations as well as the coupling of hydrodynamic modeling with climate, landscape and environmental models running at the continental scale. This work sought to investigate the uncertainties of input parameters and bidimensional (2D) flood wave routing simulation results when simplifying the terrain mesh size. A procedure for fluvial channel bathymetry interpolation and floodplain terrain data resampling was investigated for developing upscaled 2D inundation models. The proposed terrain processing methodology was tested on the Tiber River basin evaluating coarse (150 m) to very coarse (up to 700 m) flood hazard modeling results. The use of synthetic rectangular cross sections, replacing surveyed fluvial channel sections, was also tested with the goal of evaluating the potential use of geomorphic laws providing channel depth, top width and flow area when surveyed data are not available. Findings from this research demonstrate that fluvial bathymetry simplification and DTM resampling is feasible when the terrain data resampling and fluvial cross section interpolation are constrained to provide consistent representation of floodplain morphology, river thalweg profile and channel flow area. Results show the performances of low-resolution inundation simulations running in seconds while maintaining a consistent representation of inundation extents and depths.
Compound events occur when combinations of drivers and/or hazards contribute to a societal/environmental impact (Zscheischler et al., 2020). Even if none of the individual drivers or hazards are extreme, their combination can produce extreme impacts. Assessing the potential for compound extreme events is therefore critical for effective risk management and mitigation planning. To determine the probability of compound events, statistical models are applied to time series data of the drivers or hazards, typically as the first step in the risk-analysis modeling chain.
Sustainable decision making addresses resource and cost sharing among current and future generations. Adaptation costs are incurred by current and damage mitigation costs are borne by future generations. Circularity extends sustainability by including resource regeneration and benefits from resource re-use. Climate change and associated global warming are producing more frequent extreme events with different probabilities of occurrence than historically observed. Traditional approaches to asset and infrastructure design tend to be backward-looking for weather- and climate-related bases and to introduce too little variability to compensate for uncertainty, resulting in infrastructure that was designed for irrelevant future conditions. An example dynamic probabilistic risk assessment (PRA) for flood inundation is developed and implemented to examine the usefulness and limitations of PRA for sustainable water resource management. It specifically addresses the issue of sustainable decision making related to outdated but historically regulatory-compliant assets under non-stationary climatic conditions. Weather attribution provides improved extreme event frequency expectations to, generates the dynamic component of, and allows for incorporation of additional uncertainty to the PRA. Results from the PRA provide decision making optimization between current adaptation and future mitigation costs. A limitation of PRA is that it analyzes failure and risk and not benefits accruing from resource regeneration.
Compound floods are an active area of research where the complex interaction between pluvial, fluvial, coastal or groundwater flooding are analyzed. A number of studies have simulated the compound flooding impacts of precipitation, river discharge and storm surge variables with different numerical models and linking techniques. However, groundwater flooding is often neglected in flood risk assessments due to its sporadic frequency - as most regions have water tables sufficiently low that do not exacerbate flooding conditions -, isolated impacts and considerably less severity in respect to other types of flooding. This paper presents a physically-based, loosely-coupled modelling framework using FLO-2D and MODFLOW-2005 that is capable to simulate surface-subsurface water interactions to represent compound flooding events in North Miami. FLO-2D, responsible of the surface hydrology and infiltration processes, transfers the infiltration volume as recharge to MODFLOW-2005 until the soil absorption capacity is exceeded, while MODFLOW-2005 return exchange flow to the surface when groundwater heads are higher than the surface depth. The model calibration is based on three short-lived storm events that as individual processes represent minimum flooding conditions but in combination with pre-existing high-water table levels results in widespread flooding across the study area. Understanding groundwater flood risk is of particular interest to low-elevation coastal karst environments as the sudden emergence of the water table at ground surface can result in social disruption, adverse effects to essential services and damage infrastructure. Results are validated using FEMA’s severe repetitive loss (SRL) property records and crowdsourced data. Further research should assess the exacerbated impacts of high tides and sea level rise on water tables under current and future climate projections.