Implantable devices utilize flexible substrates due to their ability to conform to the complex shapes and movements of living organisms. However, these devices have a limit to the available power and necessitate low-resistance wiring to handle the extra power consumed on the substrate side. Moreover, complex wiring technology with multilayer wiring is essential to enhance the functionality of implantable devices. Previous studies primarily employed sputtering and printing methods for the fabrication of flexible substrate wiring. However, the wiring resistance is tens to hundreds Ω, causing large power loss. In this study, we aimed to create flexible, low-resistance multilayer circuit boards with resistance less than 1 Ω for implantable devices. Polydimethylsiloxane was used as the substrate material, while platinum was used as the wiring material. The wiring pattern was formed by laser micromachining using an ultrashort pulse laser, and interlayer connections were achieved using Pt Vias fabricated by microwelding. The multilayer circuit board fabricated low impedance wires of 0.25 Ω or less. Furthermore, the wiring demonstrated excellent insulation between wires, even after a 3-hour exposure test in a simulated biological environment, with no short-circuiting issues. Regarding mechanical properties, no significant changes were observed after subjecting the circuit boards to 500 cycles of repeated bending in a bending test with a 6-mm radius. In conclusion, these results indicate that the flexible multilayer circuit boards are well suited for various implantable devices that require low resistance.
Artificial retinal devices require a high-density electrode array and mechanical flexibility to effectively stimulate retinal cells. However, designing such devices presents significant challenges, including the need to conform to the curvature of the eyeball and cover a large area using a single platform. To address these issues, we developed a parylene-based multi-module retinal device (MMRD) integrating a complementary metal-oxide semiconductor (CMOS) system. The proposed device is designed for suprachoroidal transretinal stimulation, with each module comprising a parylene-C thin-film substrate, a CMOS chip, and a ceramic substrate housing seven platinum electrodes. The smart CMOS system significantly reduces wiring complexity, enhancing the device’s practicality. To improve fabrication reliability, we optimized the encapsulation process, introduced multiple silane coupling modifications, and utilized polyvinyl alcohol (PVA) for easier detachment in flip-chip bonding. This study demonstrates the fabrication and evaluation of the MMRD through in vitro and in vivo experiments. The device successfully generated the expected current stimulation waveforms in both settings, highlighting its potential as a promising candidate for future artificial vision applications.