Long-term operational stability and high-efficiency neuron stimulation are key to the development of retinal prostheses. In this research, a retinal device with a chemically inert and flexible substrate is introduced, which satisfies these requirements. We have developed a honeycomb-type retinal device that has a high-performance electrode for suprachoroidal transretinal stimulation. The device structure, in which conjunctional bioceramic substrates are embedded with large numbers of stimulating electrodes, provides high-resolution electrical stimulation. The custom CMOS microchip precisely controls the stimulation delivery of the electrodes to initiate artificial vision, offering a partial remedy for retinal ophthalmic diseases. The CMOS chip design was optimized to drastically reduce the number of input wirings. A high-performance stimulating electrode based on iridium oxide was fabricated using a unique solution process called chemical bath deposition (CBD). The honeycomb-type retinal device, equipped with CBD-derived iridium oxide electrodes, was used to evaluate the electrodes’ and device’s performances in vitro.
6 January 2023 in Journal of Materials Chemistry C
A Na-doped iridium oxide film is heterogeneously deposited on ITO. Time-resolved XAS validates the sequential oxidative–reductive steps for the Ir3+ precursor. The film exhibits an impressive electrochemical performance and a negligible bio-toxicity.
We demonstrated a multi-point stimulation system using CMOS chips designed for distributed implantable retinal prostheses. The CMOS chip integrates current sources and electrode selection circuits. This integration enables stimulation current control from multiple electrodes with minimal wires. In this study, we constructed a validation system with 49 electrodes capable of visually observing stimulation current outputs. The validation results show that it is possible to configure stimulation conditions in approximately 9.3 μs per electrode, and we demonstrated the ability to complete one frame, including the stimulation time, within approximately 11 ms. We also demonstrated parallel current stimulation from multiple electrodes using an in vitro experiment.