Holger Cebulla

Prof. Dr. Holger Cebulla

orcid

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
23 February 2018 in Proceedings
Verified
Conference Paper
Open access
PDF file
MFMarc Fleischmann
Marc Fleischmann
CEConrad Ehemann
Conrad Ehemann
JKJörg Kaufmann
Jörg Kaufmann
HCHolger Cebulla
Holger Cebulla
In 2003, the BMW Group developed a longboard called “StreetCarver”. The idea behind this product was to bring the perfect carving feeling of surf- and snowboarding on the streets by increasing the maneuverability of classical skateboard trucks. The outcome was a chassis based on complex kinematics. The negative side effect was the StreetCarver’s exceptional high weight of almost 8 kg. The main reason for this heaviness was the choice of traditional metallic engineering materials. In this research, modern fiber reinforced composites were used to lower the chassis’ mass by up to 50% to reach the weight of a common longboard. To accomplish that goal, carbon fibers were placed along pre-simulated load paths of the structural components in a so-called Tailored- Fiber-Placement process. This technology allows an angle-independent single-roving placement and leads not only to the reduction of weight but also helps to save valuable fiber material by avoiding cutting waste.

5 May 2026 in Polymers for Advanced Technologies
Verified
Journal Article
Open access
DTDr. Alhayat Getu Temesgen
Dr. Alhayat Getu Temesgen
ÜKÜmit Koç
Ümit Koç
JKJörg Kaufmann
Jörg Kaufmann
HCHolger Cebulla
Holger Cebulla
EAERCAN AYDOĞMUŞ
ERCAN AYDOĞMUŞ
HAHasan Arslanoğlu
Hasan Arslanoğlu
Advanced composite materials have become the leading material platform for high‐performance sports equipment, enabling superior strength‐to‐weight performance, stiffness tailoring, and enhanced functional integration compared with conventional materials. This review summarizes state‐of‐the‐art developments across multiple sporting disciplines, focusing on recent innovations in fiber reinforcements, matrix chemistries, hybrid architectures, and advanced manufacturing routes. Key material advances include nano‐enhanced carbon fibers, spread‐tow fabric concepts that improve laminate uniformity and surface quality, and the growing use of natural‐fiber composites to support sustainability goals while maintaining adequate mechanical efficiency for targeted components. On the manufacturing side, automated fiber placement, additive manufacturing of continuous‐fiber composites, and resin transfer molding (RTM) variants are examined as enabling technologies for precision lay‐up control, geometric complexity, repeatability, and scalable production. Application‐driven progress in cycling, racket sports, golf, water sports, and winter sports is discussed through the perspective of performance enhancement, weight minimization, durability, and regulatory constraints. Emerging research directions—bio‐inspired structural concepts, smart composites with embedded sensing, and circular‐economy strategies—are critically assessed in relation to environmental impact and end‐of‐life challenges. The review also highlights the accelerating role of computational design and optimization tools, including topology optimization, multiscale modeling, and machine learning, in shortening development cycles and guiding material/process selection. Performance validation is addressed by integrating mechanical characterization, sport‐specific testing protocols, and nondestructive evaluation approaches to ensure reliability and safety. This synthesis outlines current capabilities, identifies key research gaps, and provides future recommendations toward sustainable, adaptive, and biomimetic composite systems for next‐generation sports equipment.

5 April 2023 in Sustainability
Verified
Journal Article
Open access
PDF file
DHDavid Hartung
David Hartung
SCStefanie Celevics
Stefanie Celevics
PHPatrick Hirsch
Patrick Hirsch
IJIvonne Jahn
Ivonne Jahn
LKLovis Kneisel
Lovis Kneisel
HCHolger Cebulla
Holger Cebulla
The natural fiber-reinforced thermoplastic tape was produced using a novel process assembly that involves a drawframe and a double belt press. First, the state-of-the-art film-stacking process was modified through the integration of a drawframe to supply the natural fiber preforms for reinforcement, adding thermoplastics films as matrix material and processing them to a unidirectional tape (UD tapes) using a double belt press. Based on that, a new approach was investigated using a commingled sliver containing natural reinforcing and polymer matrix fibers to manufacture UD tapes. This leads to a reduced flow path of the matrix polymer, which is a decisive parameter for production efficiency. To ensure a homogeneous distribution and alignment of the fibers after gilling, the influence of various processing parameters on one another and the resulting UD tape quality were examined. As result, a draft ratio in the range of 10 ± 2, a low linear density (here 12 ktex) and general use of many thin in contrast to fewer heavier slivers is advisable. The differences in impregnation quality and thus the mechanical performances of the UD tapes from both processes were validated using scanning electron microscopy and mechanical testing. It was found that the commingled sliver composite had 10% higher flexural modulus and 34% higher flexural strength compared to the film-stacking-based composites. In conclusion, using commingled sliver could enable the increase in productivity and fiber volume fraction compared to film-stacking-based composites.

2 December 2025 in Proceedings
Verified
Conference Paper
Open access
PDF file
DTDr. Alhayat Getu Temesgen
Dr. Alhayat Getu Temesgen
JKJörg Kaufmann
Jörg Kaufmann
HCHolger Cebulla
Holger Cebulla
Natural flora and fauna, especially in the seas and marine life, as well as human health and global warming, are all significantly impacted by the environmental effects of petroleum-based plastics

23 October 2026 in Glass Europe
Verified
Journal Article
Open access
PDF file
MDMuawia Dafir
Muawia Dafir
Morten SmedskjaerMorten Smedskjaer
Morten Smedskjaer
LJLars R. Jensen
Lars R. Jensen
HCHolger Cebulla
Holger Cebulla
MKMartin Kilo
Martin Kilo
The development of high-modulus glasses is essential for advanced lightweight applications, requiring a fundamental understanding of how different oxide components dictate elastic performance. To maximize stiffness, oxides must be strategically introduced to enhance both network connectivity and volumetric packing density; hence, Y2O3, ZnO, and CeO₂ are investigated here due to their high single-bond dissociation energies and strong cationic field strengths. Magnesium aluminosilicate glasses (MAS) modified with Y2O3, ZnO, and CeO2 were systematically investigated to establish composition–structure–property relationships. A constrained ternary mixture design (Y2O3–ZnO–CeO2 = 14 wt.%) was used to span the compositional space efficiently. The measured Young’s modulus ranged from 97.5 to 113.8 GPa, while the specific modulus varied between 36.6 and 41.7 ×10⁶ N·m/kg. The highest values were obtained for compositions adding Y2O3 alone or Y₂O₃–ZnO. Raman spectroscopy revealed systematic changes in the Si–O stretching band, including shifts in band position and variations in band width depending on composition. These changes indicate structural reorganization of the glass network. A correlation between Raman peak position and the specific modulus (R² = 0.24, ρ = 0.033, n = 19) indicates that structural connectivity effects contribute to stiffness, whereas the corresponding correlation with Young's modulus does not reach significance at α = 0.05 (R² = 0.19, p = 0.064). Additional factors such as packing density and cation field strength are therefore also relevant. The results show that Y2O3 is the most effective oxide for increasing stiffness, ZnO exhibits composition-dependent behaviour, and CeO2 reduces the specific modulus. The combined analysis provides an experimental and structural basis to designing high-modulus glass systems.

12 December 2017
Verified
Book Chapter
Closed access
PDF file
JKJ. Kaufmann
J. Kaufmann
YKYordan Kyosev
Yordan Kyosev
HRH. Rabe
H. Rabe
KGK. Gustke
K. Gustke
HCHolger Cebulla
Holger Cebulla