Thermoplastic composites (TCs) enjoy high popularity in the field of engineering. Due to this popularity, there is a growing need to assemble this material with the help of fast and efficient joining processes. One joining process, which has seen increased use, is the process of ultrasonic welding. To make reliable statements about the quality of the joined material, some kind of quality assurance has to be made. In terms of ultrasonic spot welding, there are already some documented approaches for observing or predicting the joining quality, but some of these most promising parameters for quality assurance are difficult to measure in the process of continuous ultrasonic welding. This is why new parameters are investigated for their potential to improve the prediction of ultrasonic-welded TCs’ quality. Thermography and sound emission data have been found to have a correlation with the produced weld quality and are fed into different machine learning algorithms. Despite the relatively small dataset, trained algorithms reach binary classification rates of over 90%, indicating that the newly discovered parameters show the potential to improve the quality assurance of ultrasonic-welded TCs in the future. This improvement may enable the establishment of the ultrasonic welding of TCs in manufacturing.
1 November 2025 in IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control
The ability of ultrasound imaging to deliver real-time visualization of tissue structures and surgical instruments can provide essential benefits in guiding medical interventions. In spinal cord injury research, small animal models are commonly used, but their size restricts the applicability of many standard ultrasound systems. Capacitive Micromachined Ultrasonic Transducers (CMUTs) offer advantages over traditional piezoelectric transducers, including a smaller form factor, high design flexibility, and improved acoustic performance. CMUT structures made of polymers (polyCMUTs) can be produced cost-effectively and quickly, while potentially offering flexible, biocompatible transducers for next-generation ultrasound systems. This study introduces the first polyCMUT probe designed for imaging spinal cords in rats. A compact 11 MHz, 64 channel probe with a 12.9 x 6.5 mm small tip was developed through a three-stage fabrication process, combining in-house manufactured polyCMUT arrays with electronics, integrated in a research imaging system. Performance evaluation included electrical impedance measurements, acoustic characterization, and in-vitro and ex-vivo imaging. Quality analysis validated the stability of the fabrication process, demonstrating high yield and minimal variability, with a standard deviation in resonance frequency of less than 1%. The probe successfully visualized key anatomical structures like the central canal as well as real-time imaging of needle insertion into tissue. However, distinguishing between gray and white matter remained challenging due to limitations in frequency and bandwidth. This study demonstrates the potential of the polyCMUT technology for developing tailored ultrasound solutions. Future work will focus on optimizing high-frequency performance and advancing toward in-vivo applications to provide meaningful tools in spinal cord injury research and therapeutic interventions.
1 January 2026 in IEEE Transactions on Ultrasonics
This study investigates the effects of post-fabrication annealing on polymer-based capacitive micromachined ultrasonic transducers (polyCMUTs). These devices comprise microscopic diaphragms produced via photolithographic patterning of polymer layers. Critical point drying, required to release the diaphragms, can cause significant plastic deformation, thereby reducing electromechanical coupling. Post-fabrication annealing, carried out in incremental steps up to 190 °C, led to an effective increase in coupling by a factor of 5.4. Atomic Force Microscopy showed that the initial upward deflection of 162.7 nm decreased to 6.2 nm after annealing at 190 °C, while also improving surface uniformity. In parallel, the transducer’s resonance frequency rose from 2.33 MHz (unannealed) to 2.60 MHz, and the input impedance phase angle at resonance increased from −68.1° to −4.3°. Together, these changes indicate a significant improvement in resonator behavior and, consequently, device performance. Thus, post-fabrication annealing is an effective measure to achieve the designed performance while enhancing manufacturing yield, thereby increasing the applicability of polyCMUTs.