In the study of polymer flooding, researchers usually ignore the genetic stress properties of viscoelastic fluids. In this paper, we investigate the process of viscoelastic fluid flooding the remaining oil in the dead end. This work uses the fractional-order Maxwell in the traditional momentum equation. Furthermore, a semi-analytic solution of the flow control equation for fractional-order viscoelastic fluids is derived, and the oil-repelling process of viscoelastic fluids is simulated by a secondary development of OpenFOAM. The results show that velocity fractional-order derivative α significantly affects polymer solution characteristics, and increasing the elasticity of the fluid can significantly improve the oil repelling efficiency. Compared to the Newtonian fluid flow model, the fractional order derivative a and relaxation time b in the two-parameter instanton equation can accurately characterize the degree of elasticity of the fluid. The smaller the a, the more elastic the fluid is and the higher the oil-repelling efficiency. The larger the b, the less elastic the fluid is and the lower the cancellation efficiency. Moreover, the disturbance of the polymer solution to the dead end is divided into two elastic perturbation areas. The stronger the elasticity of the polymer solution, the higher the peak value of the area in the dead end and the higher the final oil displacement efficiency.
The thermal insulation performance of liquid hydrogen (LH2) storage tanks is critical for long-distance transportation. The active cooled shield (ACS) technologies, such as the liquid nitrogen cooled shield (LNCS) and the vapor hydrogen cooled shield (VHVCS) are important thermal insulation methods. Many researchers installed the VHVCS inside the multilayer insulation (MLI) and obtained the optimal position. However, the MLI layer is often thinner than the vacuum interlayer between the inner and outer tanks, and there is a large vacuum interlayer between the outermost side of MLI and the inner wall of the outer tank. It is unknown whether the insulation performance can be improved if we install ACS in the mentioned vacuum interlayer and separate a portion of the MLI to be installed on the outer surface of ACS. In this configuration, the number of inner MLI (IMLI) layers and the ACS position are interdependent, a coupling that has not been thoroughly investigated. Therefore, thermodynamic models for MLI, MLI-LNCS, and MLI-VHVCS schemes were developed based on the Layer-by-Layer method. By applying Robin boundary conditions, the temperature distribution and heat leakage of the MLI scheme were predicted. Considering the coupled effects of IMLI layer count and ACS position, a co-optimization strategy was adopted, based on an alternating iterative search algorithm. The results indicate that for the MLI-LNCS scheme, the optimal number of IMLI layers and LNCS position are 36 layers and 49%, respectively. For the MLI-VHVCS scheme, the optimal values are 21 layers and 39%, respectively. Compared to conventional MLI, the MLI-LNCS scheme achieves an 88.09% reduction in heat leakage. However, this improvement involves increased system complexity and higher operational costs from LN2 circulation. In contrast, the MLI-VHVCS scheme achieves a 62.74% reduction in heat leakage, demonstrating that using sensible heat from cryogenic vapor can significantly improve the thermal insulation performance of LH2 storage tanks. The work of this paper provides a reference for the design and optimization of the insulation scheme of LH2 storage tanks.
Accurately predicting the fatigue life of long-distance natural gas pipelines with internal corrosion defects is essential to ensure structural integrity and operational safety. While data-driven models offer potential in this regard, many lack interpretability. To address this, we propose a novel, interpretable machine learning framework that combines an Extreme Gradient Boosting (XGBoost, v3.0.3) model, optimized via Particle Swarm Optimization (PSO), with SHapley Additive exPlanations (SHAP) based post hoc interpretation. A dataset of 510 samples was generated through FE simulations, incorporating realistic pipe geometry, material properties, and statistically representative corrosion defect parameters. The optimized PSO-XGBoost model demonstrated exceptional predictive performance on the test set, with a coefficient of determination (R2) of 0.9921, and a Mean Absolute Error (MAE) of 2.7491 years, significantly outperforming benchmark models. Crucially, the SHAP analysis provided global and local interpretations, revealing that the defect width coefficient (k3) and pipe diameter (D) are the most influential features, while operational pressure (P) had a minimized impact due to multicollinearity handling. The research findings can provide a basis for pipeline risk assessment and integrity management.
Long-distance natural gas pipelines with internal corrosion defects are susceptible to fatigue failure under operational pressure fluctuations, posing significant risks to infrastructure integrity and safety. To address this, the present study employs a finite element methodology, utilizing Ansys Workbench to model pipelines of various specifications with parametrically defined corrosion defects, and nCode DesignLife to predict fatigue life based on Miner’s linear cumulative damage theory. The S-N curve for X70 steel was directly adopted, while a power-function model was fitted for X80 steel based on standards. A cleaned real-world pressure-time history was used as the load spectrum. Parametric analysis reveals that defect depth is the most influential factor, with a depth coefficient increase from 0.05 to 0.25, reducing fatigue life by up to 67.5%, while the influence of defect width is minimal. An empirical formula for fatigue life prediction was subsequently developed via multiple linear regression, demonstrating good agreement with simulation results and providing a practical tool for the residual life assessment and maintenance planning of in-service pipelines.
Now, all over the world, geologic hazards have became primary threatens to the natural gas pipelines. Almost all the long-distance gas pipelines pass though diversiform geologic circumstances and encounter many sorts of geologic hazards such as sink, slope movement, mud/landslide and seismic threat etc. Because of the greatly sudden and destructive characters, the consequences of gas pipeline failure resulted from the geologic hazards are always grievous. Thus, it is an important task to predict and decrease the loss of the failure. Risk assessment can offer effective methods to managers to make preferable decisions to decrease the pipelines' risk level due to geologic hazards. The mechanisms of threatens of geologic hazards to the gas pipeline are analyzed. Based on this, risk factors of natural gas pipeline due to geologic hazards are recognized, including the failure likelihood and failure consequences, and the five-grade factor system is set up. Further more, the geologic hazard risk assessment model is developed. The likelihood model is developed to account for factors that cause each threat. The consequence model is developed based on statistical analysis, industry practice, and engineering judgment (input from subject matter experts (SME's)).
Today, oil pipeline leakage accidents have occurred frequently all over the world caused by corrosion damage and resulted in a lot of loss of life, economy and environment, so integrity management on pipelines can bring huge economical and social benefits. This issue summarizes the difficulties of traditional pipeline repair methods, i.e. need repair after excavation, big workload, the high cost of the project and even the impact on traffic, amenity and citizens' life and proposes the appraisal thought for the trenchless corrosion detecting based on the analysis of corrosive factors. There are some existing common methods of trenchless corrosion detecting, including leakage flux analysis, Ultrasonic analysis, potential gradient method, PCM detecting buried pipeline leakages, identifying anode corrosion tendency points, C-scan locating fracture spots at anticorrosion and thermal insulation layers analysis and metal corrosion loss method of detecting remained pipe wall thickness, etc. This issue analyses the adaptability of these methods for the pipeline maintenance and repair from the corrosive factors and circumstance and provides scientific advice and guidance for the security and reliable operation based on the advantages and disadvantages of these methods.