In this study, we experimentally investigated the nonlinear optical properties of Au nanoparticles (Au NPs) that were prepared in pure distilled water using the laser ablation method. The Au NPs were prepared using a nanosecond Nd:YAG laser with an ablation time of 5 or 10 min at a constant laser energy of 100 mJ. The structure and the linear optical properties of the Au NPs were investigated using a transmission electron microscope (TEM) and UV-visible spectrophotometer analysis, respectively. The TEM measurements showed that the average size of the Au NPs varied from 20.3 to 14.1 nm, depending on the laser ablation time. The z-scan technique was used to investigate the nonlinear refractive index () and nonlinear absorption coefficient () of the Au NPs, which were irradiated at different excitation wavelengths that ranged from 740 to 820 nm and at different average powers that ranged from 0.8 to 1.6 W. The Au NP samples exhibited a reverse saturable absorption (RSA) behavior that increased when the excitation wavelength and/or incident laser power increased. In addition, the Au NPs acted as a self-defocusing material whenever the excitation wavelength or incident power were modified.
In this work, the fabrication of a Zirconia-Erbium co-Doped Fiber (Zr-EDF) and its application in the generation of non-linear effects as well as use in a compact pulsed fiber laser system is described. The Zr-EDF is fabricated by the Modified Chemical Vapor Deposition (MCVD) technique in combination with solution doping to incorporate the glass modifiers and nucleating agent. The resulting preforms are annealed and drawn into fiber strands with a 125.0 ± 0.5 µm diameter. Two Zr-EDFs, ZEr-A and ZEr-B, are fabricated with erbium ion concentrations of 2800 and 3888 ppm/wt and absorption rates of 14.5 and 18.3 dB/m at 980 nm respectively. Due to its higher erbium dopant concentration, a 4 m long ZEr-B is used to demonstrate the generation of the Four-Wave-Mixing (FWM) effect in the Zr-EDF. The measured FWM power levels agree well with theoretical predictions, giving a maximum FWM power - 45 dBm between 1558 nm to 1565 nm, and the generated sidebands are as predicted. The non-linear coefficient of ZEr-B is measured to be 14 W−1km−1, with chromatic and slope dispersion values of 28.45 ps/nm.km and 3.63 ps/nm2.km respectively. The ZEr-B is also used together with a graphene based saturable absorber to create a compact, passively Q-switched fiber laser. Short pulses with a pulse width of 8.8 µs and repetition rate of 9.15 kHz are generated at a pump power of 121.8 mW, with a maximum average output power of 161.35 µW and maximum pulse energy value of 17.64 nJ. The fabricated Zr-EDF has many potential applications in multi-wavelength generation as well as in the development of compact, pulsed laser sources.
A multi-wavelength Brillouin/erbium-doped fiber laser (BEFL) operating in the 1573 nm region is proposed and demonstrated. The system employs both linear and nonlinear gain from a bismuth-based erbium-doped fiber (Bi-EDF) approximately 215 cm long and a single mode fiber (SMF) of various lengths to generate an optical comb with a spacing of approximately 0.089 nm. Two 3 dB couplers were used to form a looping arm in the system in order to produce cascaded Brillouin Stokes waves as internal feedback for multi-wavelength operation. A stable output laser comb with 10 lines at more than − 13 dBm was obtained with 4.85 dBm Brillouin pump power and two 140 mW pumps at 1480 nm. The 1480 nm pumps' power and SMF length have a significant effect on the number of wavelengths and on the output power of the generated wavelength comb.