Despite being frequently proposed as a low-carbon solution for wastewater treatment and solar fuel production, the feasibility of photocatalytic processes in large-scale deployments remains unclear. This review evaluates the scalability of photocatalytic technologies by synthesizing a decade (2015–2025) of techno-economic analysis (TEA) and life-cycle assessment (LCA) studies. Using a systematic search and programmatic screening, 77 assessment-focused publications were identified from an initial corpus of 854 studies. Across applications, TEA and LCA consistently highlight two dominant barriers to scale-up: high electricity demand in UV-driven systems and significant cradle-to-gate impacts associated with catalyst synthesis, particularly for nanostructured materials. When solar irradiation replaces artificial light, environmental and economic hotspots shift from energy use to material production, catalyst durability, and reuse assumptions. Wide variability in reported costs and impacts reflects heterogeneous methodologies, limited pilot-scale data, and a lack of standardized reporting. Overall, assessment-based evidence indicates that photocatalysis is not yet ready for widespread industrial deployment as a large industrial process. However, continuous advances in solar-driven reactor design, low-impact and circular catalyst synthesis, hybrid process integration, and harmonized TEA/LCA frameworks could substantially improve its prospects for scalable, climate-positive implementation, especially in the context of emerging green energy alternatives.
The present work aimed at the development of Pt-TiO2/SiO2 materials applied to the degradation of a pharmaceutical pollutant in a fixed-bed microreactor in continuous mode. First, a wide investigation of the optimal platinum content in TiO2/SiO2 was carried out based on extensive characterization through XRD, DRS, SEM, TEM, and XPS techniques. For the content range studied, no significant changes were observed in the crystallinity of the material, with peaks related to the anatase phase and PtO2 in the diffractograms. SEM images combined with EDS spectra indicated the presence of platinum and a large heterogeneity in the particles. MET analyses showed PtO2 nanoparticles in close contact with TiO2, allowing the formation of a type II heterojunction. XPS showed platinum in the 0 and +4 oxidation states, suggesting that platinum metal and PtO2 are both present. Regarding the degradation experiments, the optimal catalyst achieved 81% degradation of acetaminophen for a residence time of 1 h, while the catalyst without platinum reached only 27% degradation. The catalyst activity dropped from 81 to 57% in 2 h and remained stable for six reuse cycles. Increasing the inlet flow rate and concentration reduced the pollutant degradation although there was an increase in the reaction rate. Finally, a photocatalytic mechanism was proposed in which a type II heterojunction was developed, with generation of hydroxyl radicals by the positive holes in the VB of TiO2 as well as superoxide radicals by the electrons in the CB of PtO2.
17 August 2021 in Separation Science and Technology
This study aimed to evaluate the degradation of methylparaben (MeP) and propylparaben (PrP) in synthetic wastewater in a membrane bioreactor (MBR) whose operation involved three stages: stage 1 (stabilization period), with no addition of parabens; stage 2, in which the MBR was fed with 0.5 mg L−1 of each paraben; and stage 3, in which both MeP and PrP were added, at 10 mg L−1each. The system performance was assessed by monitoring pH, temperature, effluent flow rate, transmembrane pressure, BOD, COD, suspended solids, and paraben concentration. The results confirmed that the MBR showed a good organic matter removal efficiency (> 92.2% for BOD; >91.6% for COD) and was not significantly affected by the addition of parabens at either low or high dosages. The volatile to total suspended solids ratio remained nearly constant, suggesting that the addition of parabens at a high concentration did not negatively impact the control of suspended solids. It was possible to achieve 96.0% of MeP and PrP removal in stage 2 ([parabens]0 = 0.5 mg L−1), and 86.0% of PrP removal in stage 3 ([PrP]0 = 10 mg L−1). Finally, biodegradation was found to be the main removal mechanism of parabens in the investigated MBR.