The persistent pharmaceutical diclofenac (DCF) presents a significant environmental challenge due to its widespread presence and biological activity in water systems. This study aimed to develop and characterize a novel, low-cost biosorbent by modifying waste guava seeds (GS) with the cationic surfactant cetyltrimethylammonium bromide (CTAB) to enhance the removal of DCF from aqueous solutions. GS and seeds modified with CTAB at 2 mmol/L (MGS-2) and 10 mmol/L (MGS-10) were prepared and characterized using FTIR, SEM-EDS, TGA, and Zeta Potential measurements. Batch adsorption experiments were conducted to assess the effects of contact time, biosorbent dosage, and solution pH. CTAB modification changed the biosorbent’s surface charge from negative to positive, thereby enhancing DCF removal. The MGS-10 biosorbent demonstrated the fastest kinetics. Critically, an intermediate level of surfactant modification (MGS-2) proved optimal, achieving a maximum adsorption capacity of 38.0 mg/g at 45 °C. This capacity significantly surpassed both the GS (29.7 mg/g) and the MGS-10 (32.7 mg/g). This superior performance is attributed to a favorable multi-stage adsorption mechanism, which combines electrostatic attraction and hydrophobic interactions, and is determined to be an endothermic and entropy-driven process. While highly effective, the biosorbents showed poor regenerability with NaOH, indicating a need to explore alternative regeneration methods. This work demonstrates that optimally modified guava seeds are a promising and sustainable material for remediating pharmaceutical contaminants from water.
Valorization of agro-industrial waste into functional materials is fundamental to the circular economy, especially for addressing the persistent contamination by anionic azo dyes in textile wastewater. This study evaluates guava seeds modified with hexadecyltrimethylammonium bromide (GS-M) as low-cost biosorbents for the removal of Direct Blue 71 (DB71), comparing their performance with that of natural seeds (GS-N) in batch systems and fixed-bed columns. Characterization by infrared spectroscopy (FTIR) and electron microscopy (SEM-EDS) confirmed successful surfactant immobilization, thereby creating a cationic surface with strong electrostatic affinity for anionic dye molecules. Batch experiments showed that GS-M achieved 98% DB71 removal within 120 min, whereas GS-N reached only 58% after 300 min. For GS-M, both pseudo-first-order and pseudo-second-order models fit the kinetic data well, consistent with concurrent electrostatic and hydrophobic interactions; GS-N was best described by the Elovich model, indicating rate limitation by electrostatic repulsion. GS-M maintained removal efficiency above 84% across pH 3–9, whereas GS-N was effective under acidic conditions. Langmuir maximum adsorption capacity (Qo) values for GS-M were 6.02 mg/g at pH 4 and 7.87 mg/g at pH 8, a 1.5- to 2.2-fold increase over GS-N under matched conditions. Three adsorption–desorption cycles retained ~49% of the initial GS-M capacity, supporting a short-cycle reuse profile rather than indefinite multi-cycle operation. Fixed-bed column performance was highly sensitive to the hydraulic loading rate (vc), with breakthrough times increasing nearly eightfold as vc decreased. The Bed Depth Service Time (BDST), Thomas, and Yoon–Nelson models described the dynamic data consistently, yielding a maximum dynamic capacity of 165.6 mg/L under optimal conditions and providing a quantitative basis for scale-up. These results establish surfactant-modified guava seeds as a low-cost, pH-resilient biosorbent system aligned with circular-economy principles for the sustainable remediation of textile wastewater.