This work informs on the green synthesis of a novel adsorbent and its adsorption capacity. The adsorbent was synthesized by the combination of iron nanoparticles and cellulose nanofibers (FeNPs/NFCs). Cellulose nanofibers (NFCs) were obtained from Moringa (Moringa oleifera Lam.) by a pulping Kraft process, acid hydrolysis, and ultrasonic methods. The adsorption method has advantages such as high heavy metal removal in water treatment. Therefore, cadmium (Cd) and lead (Pb) adsorption with FeNP/NFC from aqueous solutions in batch systems was investigated. The kinetic, isotherm, and thermodynamic parameters, as well as the adsorption capacities of FeNP/NFC in each system at different temperatures, were evaluated. The adsorption kinetic data were fitted to mathematical models, so the pseudo-second-order kinetic model described both Cd and Pb. The kinetic rate constant (K2), was higher for Cd than for Pb, indicating that the metal adsorption was very fast. The adsorption isotherm data were best described by the Langmuir–Freundlich model for Pb multilayer adsorption. The Langmuir model described Cd monolayer sorption. However, experimental maximum adsorption capacities (qe exp) for Cd (>12 mg/g) were lower than those for Pb (>80 mg/g). In conclusion, iron nanoparticles on the FeNP/NFC composite improved Cd and Pb selectivity during adsorption processes, indicating the process’ spontaneous and exothermic nature.
Heavy metal pollution in water resources, particularly cadmium and lead, poses a significant environmental and public health challenge, requiring the development of sustainable, efficient, and cost-effective water treatment methods. Therefore, this study investigates the biosorption capabilities of natural (SN) and surfactant-modified (SM) guava seed biosorbents to remove Cd and Pb from aqueous solutions. Guava seeds, an agricultural waste material, were treated with hexadecyltrimethylammonium bromide (HDTMA-Br) to enhance their adsorption efficiency. The biosorbents were characterized by FTIR, SEM-EDS, and zeta potential analysis to explain the surface modifications and their influence on the adsorption mechanisms. Batch experiments were performed to evaluate the effects of pH, contact time, temperature, biosorbent dosage, and concentration on Cd and Pb removal efficiencies. Adsorption isotherm and kinetic data were analyzed using mathematical models to obtain the basic parameters of the systems under study. The results showed that SM exhibited superior adsorption capacities of 328 mg/g for Cd and 594 mg/g for Pb at 25 °C, significantly outperforming SN. The study analyzed the thermodynamic parameters of adsorption systems, revealing endothermic and exothermic properties for SN and SM. Functional groups like hydroxyl and carbonyl were crucial for metal ion binding. HDTMA-Br introduced active sites and enhanced surface charge interactions. Regeneration tests showed reusability, maintaining over 85% efficiency after four cycles. Guava seeds could be cost-effective and sustainable biosorbents for heavy metal removal.
The persistent pharmaceutical diclofenac (DCF) presents a significant environmental challenge due to its widespread presence and biological activity in water systems. This study aimed to develop and characterize a novel, low-cost biosorbent by modifying waste guava seeds (GS) with the cationic surfactant cetyltrimethylammonium bromide (CTAB) to enhance the removal of DCF from aqueous solutions. GS and seeds modified with CTAB at 2 mmol/L (MGS-2) and 10 mmol/L (MGS-10) were prepared and characterized using FTIR, SEM-EDS, TGA, and Zeta Potential measurements. Batch adsorption experiments were conducted to assess the effects of contact time, biosorbent dosage, and solution pH. CTAB modification changed the biosorbent’s surface charge from negative to positive, thereby enhancing DCF removal. The MGS-10 biosorbent demonstrated the fastest kinetics. Critically, an intermediate level of surfactant modification (MGS-2) proved optimal, achieving a maximum adsorption capacity of 38.0 mg/g at 45 °C. This capacity significantly surpassed both the GS (29.7 mg/g) and the MGS-10 (32.7 mg/g). This superior performance is attributed to a favorable multi-stage adsorption mechanism, which combines electrostatic attraction and hydrophobic interactions, and is determined to be an endothermic and entropy-driven process. While highly effective, the biosorbents showed poor regenerability with NaOH, indicating a need to explore alternative regeneration methods. This work demonstrates that optimally modified guava seeds are a promising and sustainable material for remediating pharmaceutical contaminants from water.
The contamination of groundwater by fluoride poses a serious global health concern. This research investigates the enhancement of guava seed microparticles (GSM) for fluoride adsorption by modifying them with a cationic surfactant (HDTMA-Br) and iron nanoparticles (MNP), resulting in a functionalized biosorbent (GSM-Fe). The research evaluates the process’s fluoride adsorption capacity, mechanisms, and thermodynamics. Characterization techniques confirmed successful surface modifications, including SEM, FTIR, and zeta potential measurements. Batch experiments assessed the impact of contact time, adsorbent dosage, solution pH, and temperature on fluoride removal. GSM-Fe exhibited a maximum adsorption capacity of 559.9 mg/g at 25°C, significantly higher than unmodified GSM (89.2 mg/g). The adsorption followed the Langmuir-Freundlich isotherm and pseudo-second-order kinetics. Fluoride adsorption primarily occurs through hydrogen bonding, electrostatic attraction, and interactions with functional groups such as hydroxyl and carboxyl groups on the biosorbent surface. The process was endothermic, with higher fluoride removal efficiency at elevated temperatures. Thermodynamic analysis confirmed the spontaneity of adsorption at higher temperatures. This study demonstrates that GSM-Fe is a highly efficient, cost-effective, and sustainable biosorbent for fluoride removal from water, offering a promising solution for managing fluoride contamination, particularly in developing regions.
Heavy metal pollution in water resources represents a severe environmental and public health challenge, with cadmium (Cd) and lead (Pb) being some of the most toxic contaminants. Finding new sustainable, efficient, and cost-effective methods for water treatment is essential to address such problems. Therefore, this study investigates the biosorption capabilities of natural (SN) and surfactant-modified (SM) guava seed biosorbents to remove Cd and Pb from aqueous solutions. To enhance their adsorption efficiency, Guava seeds, an agricultural waste material, were treated with hexadecyltrimethylammonium bromide (HDTMA-Br). The biosorbents were characterized by FTIR, SEM-EDS, and zeta potential analysis to understand the surface modifications and their influence on the adsorption mechanisms. Batch experiments were performed to evaluate the effects of pH, contact time, temperature, biosorbent dosage, and concentration on Cd and Pb removal efficiencies. Adsorption isotherm and kinetic data were analyzed using mathematical models to obtain the basic parameters of the systems under study. The results showed that SM exhibited superior adsorption capacities of 328 mg/g for Cd and 594 mg/g for Pb at 25 °C, significantly outperforming SN. The study also analyzed the thermodynamic parameters of adsorption systems, revealing endothermic and exothermic properties for SN and SM. Functional groups, such as hydroxyl and carbonyl, were crucial in metal ion binding. HDTMA-Br introduced additional active sites and enhanced surface charge interactions. Regeneration tests showed the reusability of both biosorbents, maintaining an efficiency of over 85% after four cycles. Guava seeds, after surfactant modification, could be cost-effective and sustainable biosorbents for heavy metal removal in water treatment.