This study presents a L2 norm-enabled variable step-size adaptive least mean square (LMS) controller for grid-connected photovoltaic (PV) converter. The variable step-size is adopted to damp out the weight oscillations and to enable faster convergence under exposure to disturbances in the load and solar insolation. More precisely, to achieve oscillations free response, a non-linear relationship is developed between step-size and estimated error. This way, it significantly improves the convergence speed and stability. The iteration function of presented variable step-size feature includes the input signal to study the impact of harmonically polluted load current on the weight extraction performance. Besides, the designing procedure of step-size considers both current and previous error states, thereby ensuring noise immunity. With inclusion of these features, the devised controller is applied to accurately extracting the fundamental weight component of the load current and in turn enabling various ancillary services. The proposed control algorithm is designed in MATLAB/Simulink software and its effectiveness is examined under both steady-state and transient conditions during grid disturbances. Further, the practicability of proposed controller is verified and compared with conventional controls using ARM cortex M4 microcontroller-based laboratory testbed. In a nutshell, the results confirm the oscillations free weight component with higher convergence and better stability under various operating conditions.
28 March 2017 in Electric Power Components and Systems
This research work proposes a heuristic approach for the planning of Distributed Generator (DG) to minimize annual system energy loss. The particle-swarm-optimization-based method has been used as an optimization tool for determining the optimal size and allocating the DGs to minimize energy loss. In this approach, time-varying characteristics of electrical load demand have been considered to mimic real load scenario in the electrical distribution system. The proposed approach is generic and simple. It can provide optimal solutions to the distribution utilities to select multiple DGs in stages under various constraints. The effectiveness of the proposed approach is validated on 16-, 33-, and 69-bus radial distribution networks. The results are compared with those of already existing methods as suggested in the literature.