Porous metal structures have emerged as a promising solution in repairing and replacing damaged bone in biomedical applications. With the advent of additive manufacturing technology, fabrication of porous scaffold architecture of different unit cell types with desired parameters can replicate the biomechanical properties of the natural bone, thereby overcoming the issues, such as stress shielding effect, to avoid implant failure. The purpose of this research was to investigate the influence of cube and gyroid unit cell types, with pore size ranging from 300 to 600 µm, on porosity and mechanical behavior of titanium alloy (Ti6Al4V) scaffolds. Scaffold samples were modeled and analyzed using finite element analysis (FEA) following the ISO standard (ISO 13314). Selective laser melting (SLM) process was used to manufacture five samples of each type. Morphological characterization of samples was performed through micro CT Scan system and the samples were later subjected to compression testing to assess the mechanical behavior of scaffolds. Numerical and experimental analysis of samples show porosity greater than 50% for all types, which is in agreement with desired porosity range of natural bone. Mechanical properties of samples depict that values of elastic modulus and yield strength decreases with increase in porosity, with elastic modulus reduced up to 3 GPa and yield strength decreased to 7 MPa. However, while comparing with natural bone properties, only cube and gyroid structure with pore size 300 µm falls under the category of giving similar properties to that of natural bone. Analysis of porous scaffolds show promising results for application in orthopedic implants. Application of optimum scaffold structures to implants can reduce the premature failure of implants and increase the reliability of prosthetics.

Bellow sealing in valves provides the characteristic of no emission sealing by extending or compressing within the elastic limit to operate the valve. To keep the motion of the bellow within the elastic limit, a long length of bellow is required, which increases the length of the shaft and height of the valve. Increased height restricts valve usage, especially for large sizes, due to the limited platform space. This study presents the application of a six-bar linkage to operating mechanism by replacing the reciprocating shaft in an attempt to reduce the height of the valve. The mechanism produced aims to reduce the input displacement while maintaining the output displacement in order to reduce the required bellow length. Graphical synthesis of the mechanism was carried out using Autodesk Inventor. The designed mechanism was then subjected to analysis using a simulation tool for the position, force, and flow analysis. The prototype valve with the application of the new mechanism was manufactured using additive manufacturing, which was later used for experimental testing. Application of the mechanism to the bellow valve reduced the required input by 75%, which as a result, reduced the height of the valve up to 50%. The force analysis depicted that the force required to operate the mechanism was approximately eight times higher than the conventional design. Flow analysis of the valve showed that the introduction of the new mechanism had no effect on the flow efficiency of the valve and the flow coefficient of valve remained the same. Application of the six-bar linkage to the valve control mechanism made the design of the valve compact when compared to conventional design in terms of height, which makes it more suitable for use in industry.

Valves have wide usage in industries ranging from food industries to petrochemical industries. Existing manufacturing processes, such as casting and forging, limit the design of globe valve to design for manufacturing. The purpose of this study is to optimize the design of current globe valve for optimized flow path. Current design of valve was modelled in CAD software and CFD analysis was performed on its geometry to identify the optimization points. Results obtained from simulations show significant increase in valve’s performance, flow efficiency and decreases in pressure drop. Comparison of flow coefficient between original design and new design show approx. 35% increase in efficiency. Proposed design can be manufactured using additive manufacturing to overcome the manufacturing constraints.