1 December 2012 in Tribology International
1 January 2016 in Procedia Engineering
Magnesium alloy is highly potential material for biodegradable implant application. Due to limitations in conventional machining methods, non-traditional machining method such as electrical discharge machining (EDM) die sinking process is proposed to produce intricate shape with tight tolerance on magnesium alloy. Nine EDM experiments with three levels and four parameters were conducted using Taguchi method on AZ31 magnesium alloy to explore the optimum machining parameters. It was found that pulse on-time was the most significant parameter affecting the surface roughness (Ra) of the machined surface. The optimum EDM condition obtained was 47 A peak current, 80V voltage, 16μs pulse on-time and 512μs pulse off-time. A confirmation test was conducted and the result shows 95.5% similarity with the predicted Ra. However, the formation of cracks and craters were found on the machined surface area. It is proposed to solve this problem by applying powder mixed EDM method in future research work
15 March 2018 in IOP Conference Series: Materials Science and Engineering
1 November 1997 in Tribology International
22 May 2013 in Tribology Transactions
This article presents an analysis of a long journal bearing with a double-layer porous lubricant film using couple stress and Newtonian fluids. The porous layer with infinite permeability analyzed in this study simulates the surface layer. The Brinkman model was utilized to model the flow in the porous region. The effects of couple stresses were analyzed based on Stokes microcontinuum theory. A double-layer porous lubricant film configuration, with a low-permeability porous layer on top of a high-permeability bearing adherent porous layer, improved the journal bearing performance characteristics. A surface porous layered lubricant film configuration increased the load-carrying capacity and reduced the coefficient of friction in a journal bearing.
2 March 2018 in Journal of Tribology
Partial slip texture surfaces have proven to be effective to improve load capacity and reduce coefficient of friction in slider and journal bearings. By controlling the partial slip surface texture properties, bearing with desired performance can be designed. It is of consequent interest to study the lubrication of slider and journal bearing systems taking into consideration design of partial slip texture surfaces. This paper aims at covering several investigation works related to slider and journal bearing lubricated with Newtonian fluids focusing on partial slip texture influence on bearing performance characteristics.