Clostridium botulinum is a foodborne pathogen responsible for severe neuroparalytic disease associated with the ingestion of pre-formed toxin in food, with processed meats and canned foods being the most affected. Control of this pathogen in meat products is carried out using the preservative sodium nitrite (NaNO2), which in food, under certain conditions, such as thermal processing and storage, can form carcinogenic compounds. Therefore, the objective was to use nanoemulsified essential oils (EOs) as natural antimicrobial agents, with the aim of reducing the dose of NaNO2 applied in mortadella. The antimicrobial activity of nanoemulsions prepared with mixtures of EOs of garlic, clove, pink pepper, and black pepper was evaluated on endospores and vegetative cells of C. botulinum and Clostridium sporogenes (surrogate model) inoculated in mortadella prepared with 50 parts per million NaNO2. The effects on the technological (pH, water activity, and color) and sensory characteristics of the product were also evaluated. The combinations of EOs and their nanoemulsions showed sporicidal effects on the endospores of both tested microorganisms, with no counts observed from the 10th day of analysis. Furthermore, bacteriostatic effects on the studied microorganisms were observed. Regarding the technological and sensorial characteristics of the product, the addition of the combined EOs had a negative impact on the color of the mortadella and on the flavor/aroma. Despite the strong commercial appeal of adding natural preservatives to foods, the effects on flavor and color must be considered. Given the importance of controlling C. botulinum in this type of product, as well as the reduction in the amount of NaNO2 used, this combination of EOs represents a promising antimicrobial alternative to this preservative, encouraging further research in this direction.
This study investigates the development and characterization of bioactive films incorporating silver nanoparticles (AgNPs) into biocompatible polymers, namely alginate and chitosan, fabricated using two methods, spin-coating and drop-casting, and aiming to enhance their antimicrobial properties. Dynamic light scattering (DLS) and electrophoretic mobility (EM) of the film precursor solutions revealed significant changes in the nanoparticles’ size and Zeta potential (ZP), reflecting the influence of polymer coatings. Alginate contributed to high electrostatic stability due to its negative charge, while chitosan facilitated specific interactions with negatively charged surfaces. Raman spectroscopy revealed that spin-coating conditions did not successfully result in film formation, highlighting the need for further optimization. Therefore, subsequent characterization studies were conducted only for the films formed by drop-casting. Topographical and nanomechanical assessments of these drop-cast films, using atomic force microscopy (AFM) and force spectroscopy, demonstrated that AgNPs reduced adhesion and elasticity in alginate films, while increasing rigidity and adhesion in chitosan-based films. Antimicrobial tests confirmed the efficacy of AgNPs in both precursor solutions and polymer films, with chitosan-based films that retained structural integrity, which makes them suitable for prolonged applications, while alginate films displayed rapid gelation upon hydration, potentially advantageous in short-term applications. The findings underscore the potential of these biopolymer-AgNP composites in creating antimicrobial materials for food packaging, wound dressings, and other biomedical applications. However, challenges related to film deposition methods, such as spin-coating, require further optimization to improve film formation and reproducibility.
21 May 2021 in Revista Brasileira de Agrotecnologia
Bacillus cereus é uma bactéria patogênica associada à toxinfecções alimentares, capaz de formar biofilmes sobre superfícies de processamento de alimentos. Uma alternativa para controlar o crescimento de B. cereus nas indústrias de alimentos são os óleos essenciais e ou seus componentes majoritários, compostos naturais com propriedades antibiofilmes. Desse modo, o objetivo do trabalho foi avaliar a ação bactericida dos componentes majoritários de óleos essenciais, cinamaldeído, citral e carvacrol, e suas combinações sobre células planctônicas e sésseis de B. cereus ATCC 14579. A concentração mínima bactericida (CMB) dos compostos majoritários sobre as células planctônicas foi determinada empregando-se a técnica de macrodiluição em caldo BHI, avaliando-se concentrações entre 0,016 a 2%. A concentração mínima bactericida do biofilme (CMBB) foi determinada após a formação dos biofilmes de B. cereus em microplaca de poliestireno por 72 h a 37 °C. Os biofilmes foram expostos à soluções dos componentes majoritários nas concentrações de 0,016 a 2% por 20 min. As combinações entre os componentes majoritários foram realizadas empregando-se o planejamento experimental de mistura simplex-centróide. As CMB sobre as células planctônicas de B. cereus dos três componentes avaliados foram iguais a 0,0625%, já para as células sésseis as CMBB variaram, sendo de 1% para cinamaldeído e citral e 2% para o carvacrol. Todas as combinações testadas inibiram o crescimento das células planctônicas. No entanto, para as células sésseis, somente 5 combinações foram eficazes. Os resultados comprovam a ação bactericida dos compostos testados e seu potencial para ser utilizado como conservante ou sanitizante natural na indústria alimentícia.
14 December 2017 in Revista Mundi Engenharia, Tecnologia e Gestão (ISSN: 2525-4782)
O ácido clavulânico (AC) é um metabólito secundário produzido pela bactéria Gram-Positiva Streptomyces clavuligerus. É um composto de suma importância, principalmente para a indústria farmacêutica, pois possui ação antibacteriana. É utilizado em associação com outros antibióticos, como a amoxicilina. Sua produção ocorre por via fermentativa. O pH e a temperatura do meio são parâmetros relevantes que podem comprometer a produção deste metabólito. O presente trabalho teve como objetivo avaliar a influência da temperatura e do pH na produção de ácido clavulânico a partir de Streptomyces clavuligerus ATCC 27064. Para isso, um número mínimo de experimentos foi desenhado com diferentes valores de pH e temperatura utilizando o planejamento experimental estatístico, delineamento composto central rotacional, DCCR, tendo como variáveis pH e temperatura e como resposta a produtividade do ácido clavulânico. Amostras foram retiradas a cada 12 horas e a produção de ácido clavulânico determinada por método espectrofotométrico. O cultivo realizado em pH 6,7 e temperatura 27ºC apresentou maior produtividade do ácido clavulânico.
The effects of additioning essential oil mixtures and reducing the sodium nitrite content (75 ppm) on Clostridium difficile inoculated in mortadellas and on the product’s technological characteristics were evaluated. 15 essential oils were tested preliminarily, but only four were selected. The minimum bactericidal concentrations found were 1.2 % for Ocimum basilicum, 0.3 % for Origanumvulgare and for Thymusvulgaris and 0.15 % for Litsea cubeba. There wasn`t significant difference in viable cell growth between treatments and the control; however, there was an increase in viable cells of approximately 2.5 log10 MPN/g after the fifth day. Combinations of oils didn`t prevent sporulation, however a synergistic effect was observed in vitro. There was a reduction in pH during storage and a greater amount of residual nitrite for the F1 treatment (Origanum vulgare (0.2 %); Thymus vulgaris (0.05 %) and Litsea cubeba (0.025 %), with 10.23 ppm, and reduction of residual nitrite during the storage period from 18.75 ppm on the first day of storage to 5.11 ppm on the last. No significant changes were observed in the technological characteristics of the product with the analyzed treatments.
Kraft paper, commonly known as brown paper, has been widely used in the preservation of various food products and is increasingly explored in the development of active packaging materials with antimicrobial functionality by incorporating metal nanoparticles. This study aimed to comparatively investigate the surface modification of Kraft paper with silver nanoparticles (AgNPs) using dip-coating and drop-casting techniques. AgNPs were produced via green synthesis and incorporated onto the surface of Kraft paper samples. The modified samples were characterized using physicochemical techniques, including atomic force microscopy (AFM), Raman spectroscopy and light microscopy, as well as nanomechanical characterization via force spectroscopy. The antimicrobial activity of the modified papers was assessed using the disk diffusion method. The results demonstrated that the modification techniques resulted in distinct surface characteristics. Samples treated with the drop-casting method exhibited the highest AgNP surface loading; however, this was accompanied by pronounced surface heterogeneity and a tendency toward reduced load-bearing capacity. Overall, the findings indicate that the choice of deposition technique plays a key role in controlling nanoparticle distribution and surface properties. Within the limitations of the techniques evaluated, the incorporation of nanomaterials with potential antimicrobial activity into Kraft paper may offer opportunities for the development of active food packaging, although further optimization is required.