The use of cellulosic reinforcement fillers, including cellulose and holocellulose, in the development of sustainable biopolymer composites has become increasingly essential and continues to attract significant attention in the composite industry. This study aimed to improve the structural and morphological characteristics of the polyhydroxybutyrate (PHB) matrix by incorporating cellulosic fillers—namely, α-cellulose and holocellulose produced via a green processing method—and to evaluate the effect of hemicellulose, present in holocellulose and exhibiting compatibilizing capability, on the overall performance of PHB-based blends. For this, the PHB matrix was first dissolved in chloroform, after which the cellulosic fillers were incorporated into the PHB–chloroform mixtures at 1 wt.% to provide the best homogeneous fiber dispersion. The PHB and cellulosic filler mixtures were blended at 500 rpm with a magnetic mixer for 30 min, and the resulting composite was cast onto a Teflon plate. Scanning electron microscopy (SEM), X-ray diffraction (XRD), and Fourier transform infrared (FTIR) spectroscopy were used to characterize the morphological and structural analysis of the obtained biopolymer-based composites. Thermogravimetric analysis (TG-DTG) was used to determine the thermal properties. The results obtained confirmed the presence of cellulosic fillers in the PHB matrix using FTIR, XRD, and SEM. In contrast to holocellulose, α-cellulose in the PHB matrix was shown to create a more organized structure. Both α-cellulose and holocellulose reinforcements were found to have similar effects on the thermal properties of the PHB matrix. Compared with neat PHB, the amount of residual char was found to be more than 36-fold in the sample containing α-cellulose and more than 41-fold in the sample containing holocellulose.
17 January 2024 in Kahramanmaraş Sütçü İmam Üniversitesi Tarım ve Doğa Dergisi
In this study, the stem anatomy of nine Crepis (Asteraceae) taxa were decribed for the first time from Türkiye. The anatomical data obtained were evaluated in terms of taxonomy with analysis of variance and principal components analysis. The stem mainly consist of one layer epidermis, parenchymatous cortex, collateral vascular bundles and parenchymatous pith in all taxa examined. Glandular or non-glandular trichomes are found in the epidermal cells of the stem in some species examined. Despite that fact that all taxa examined have similar stem anatomy, quantitative traits such as length or width of the anatomical characters significantly varry among the taxa. In particular, the xylem thickness considerably differs among the taxa studied, according to the results of analysis of variance. Besides, the xylem is more thicker in caulescent species than scapigerous taxa. According to the results of principal components analysis, the xylem thickness and the epidermis cell length explain most of the total variation with about 82% value among the studied taxa. These results show that xylem thickness and epidermis cell length have a high taxonomic value.
4 December 2023 in Turkish Journal of Forestry | Türkiye Ormancılık Dergisi
Due to their cost-effectiveness and environmentally friendly nature, deep eutectic solvents (DESs) hold great potential for applications in biomass conversion and the production of green chemicals. In this study, the delignification of the stone pine (Pinus pinea L.) cone was performed using seven different ternary deep eutectic solvents (TDESs). TDES treatments of stone pine cone samples were carried out in a microwave for 30 min. at 150 °C. The two-based components of TDESs were choline chloride (ChCl - 1 mol) and lactic acid (LA - 9 mol). The formic acid (FA – 2 mol), boric acid (BA – 1 mol), acetic acid (AA – 2 mol), sorbitol (S – 1 mol), triethylene glycol (TEG – 2 mol), ethylene glycol (EG – 2 mol), and glycerol (G – 2 mol) were used as third component of TDES. ChCl:LA:BA gave the lowest solid residue yield (57.90%) and highest lignin purity (86.89%). Klason lignin content of control was 35.08%. The lowest lignin content (19.42%) and highest delignification (68.89%) were obtained with ChCl:LA:FA treatment. The lowest and the highest L* values were obtained from ChCl:LA:BA and ChCl:LA:EG treatments with 21.76 and 37.36, respectively. This results showed that the third component of TDES affects the delignification efficiency of stone pine cone.
The accurate and rapid determination of trace copper Cu(II) ions in environmental water is of great significance for both ecological safety and human health. In this work, a novel, eco-friendly, and highly sensitive fluorescence sensor was developed using carbon dots synthesized from pine cone deep eutectic solvent (DES) lignin and doped with lysine for the selective detection of Cu(II) ions. The synthesized carbon dots exhibited excellent optical properties. They demonstrated a strong, concentration-dependent fluorescence response to Cu(II) with a wide linear range of 2.81 × 10–7–5.87 × 10–5 and a remarkably low limit of detection (LOD) of 2.8 × 10–8 mol L–1. To validate the practical applicability and reliability of the proposed sensor, it was successfully employed for Cu(II) determination in highly complex matrices, including various certified reference materials (primary drinking water, NASS-5 seawater, SM-WW1, and SM-WW2 wastewater) and real environmental samples (ground, lake, and tap water). The standard addition method yielded excellent recovery rates ranging from 98.9 to 104.4%, with relative standard deviations (RSDs) strictly below 4.3%. Furthermore, the analytical results were statistically compared with the standard flame atomic absorption spectrometry (FAAS) method at a 95% confidence level, showing exceptional agreement and no significant differences. The proposed lysine-doped carbon dot sensor offers a highly accurate, cost-effective, and highly selective alternative for the routine monitoring of Cu(II) in diverse and complex environmental water samples, effectively overcoming significant matrix interference.