Oleksii, Alexej, Алексей, Олексій Balenko

Oleksii, Alexej, Алексей, Олексій Balenko

orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
31 March 2024 in Crystals
Verified
Journal Article
Open access
PDF file
Vasyl LozynskyiVasyl Lozynskyi
Vasyl Lozynskyi
Bohdan TrembachBohdan Trembach
Bohdan Trembach
EKEgidijus Katinas
Egidijus Katinas
KSKostiantyn Sadovyi
Kostiantyn Sadovyi
MKMichal Krbaťa
Michal Krbaťa
Liubomyr RopyakLiubomyr Ropyak
Liubomyr Ropyak
In the conditions of an energy crisis, an important issue is the increase in energy efficiency and productivity of welding and hardfacing processes. The article substantiates the perspective of using exothermic additives introduced into core filler for flux-cored wire arc welding processes as a relatively cheap additional heat source, reducing energy consumption when melting filler materials, and increasing the deposition rate. The mixture design (MD) was selected as the design method to optimize the average values of current and voltage, as well as arc stability parameters depending on core filler composition. This article studies the influence of the introduction of exothermic addition (EA), as well as the ratios CuO/C and CuO/Al on arc stability for the FCAW S process. Parameters characterizing arc stability were determined using an oscillograph, and from the obtained oscillograms, an analysis was conducted on arc voltage and welding current signals during flux-cored arc welding. It was determined that various methods can be used to evaluate arc stability, which can be divided into two groups: graphical (current and voltage cyclograms, box plots with frequency histograms, ellipse parameters plotted on current, and voltage cyclograms) and statistical (standard variation and coefficients of variation for welding current and arc voltage). In this paper, a comprehensive evaluation of arc stability depending on the composition of the cored wire filler was carried out. It was determined that the most stable current parameters were observed for the flux-cored wire electrode with an average exothermic addition content at the level of EA = 26.5–28.58 wt.% and a high carbon content (low values of CuO/C = 3.75). Conversely, the lowest values of arc stability (CV(U) and Std(U)) were observed during hardfacing with a flux-cored wire electrode with a high CuO/Al ratio ≥ 4.5 and a content of exothermic addition in the core filler below the average EA < 29 wt.%. Mathematical models of mean values, standard deviation, coefficient of variation for welding current, and arc voltage were developed. The results indicated that the response surface prediction models had good accuracy and prediction ability. The developed mathematical models showed that the ratio of oxidizing agent to reducing agent in the composition of exothermic addition (CuO/Al) had the greatest influence on the welding current and arc voltage characteristics under investigation. The percentage of exothermic mixture in the core filler (EA) only affected the average welding current (Iaw) and the average arc voltage (Uaw). The graphite content expressed through the CuO/C ratio had a significant impact on welding current parameters as well as the coefficient of variation of arc voltage (CV(U)). Two welding parameters were selected for optimization: the mean welding current (Iaw) and the standard deviation of arc voltage (Std(U)). The best arc stability when using exothermic addition CuO-Al in the core filler was observed at CuO/Al = 3.6–3.9, CuO/C = 3.5–4.26, and at an average EA content of 29–38 wt.%. The significant influence of the CuO/Al and CuO/C ratios on arc voltage parameters can also be explained by their impact on the elemental composition of the welding arc (copper, cupric oxide (CuO), and Al2O3). The more complete this reaction, the higher the amount of easily vaporized copper (Cu) in the arc plasma, enhancing arc stability. The influence of core filler composition on the microstructure of deposited metal of the Fe-Cr-Cu-Ti alloy system was investigated.

10 June 2025 in Eng
Verified
Journal Article
Open access
PDF file
Bohdan TrembachBohdan Trembach
Bohdan Trembach
ITIllia Trembach
Illia Trembach
AGAleksandr Grin
Aleksandr Grin
NMNataliia Makarenko
Nataliia Makarenko
OBOlha Babych
Olha Babych
APAnatoliy Panchenko
Anatoliy Panchenko
This paper investigates self-shielded flux-cored wires with an exothermic MnO2-Al addition and the effect of hardfacing modes on the deposited alloy of the Fe-C-Mn system for the first time. Additionally, the paper proposes a new experimental research methodology using an orthogonal experimental design with nine experiments and three levels. At the first stage, it is proposed to use the Taguchi plan (L9) method to find the most significant variables. At the second stage, for the development of a mathematical model and optimization, a factorial design is recommended. The studied parameters of the hardfacing mode were travel speed (TS), set voltage on the power source (Uset), contact tip to work distance (CTWD), and wire feed speed (WFS). The following parameters were studied: welding thermal cycle parameters, microstructure, grain size, non-metallic inclusions, and mechanical properties. The results of the analysis showed that the listed parameters of the hardfacing modes have a different effect on the characteristics of the hardfacing process with self-shielded flux-cored wires with an exothermic addition in the filler. It was determined that for flux-cored wires with an exothermic addition, the size of the deposited metal grain size is most affected by the contact tip to work distance (CTWD). The research results showed that the travel speed (TS) had the main influence on the thermal cycle parameters (heat input, cooling time) and hardness. The analysis of the deposited metal samples showed that an increase in the travel speed had a negative impact on the number of non-metallic inclusions (NMIs) in the deposited metal. While the size of NMIs was influenced by the wire feed speed and the set voltage on the power source.

1 January 2025 in Materials Science
Verified
Journal Article
Closed access
PDF file
ITI. O. Trembach
I. O. Trembach
Bohdan TrembachBohdan Trembach
Bohdan Trembach
AGA. G. Grin
A. G. Grin
RLR. Ya. Luzhetskyy
R. Ya. Luzhetskyy
VBV. O. Brechko
V. O. Brechko
OKO. V. Kabatskyi
O. V. Kabatskyi

3 January 2026 in Eng
Verified
Journal Article
Open access
PDF file
Bohdan TrembachBohdan Trembach
Bohdan Trembach
Oleh DmitriievOleh Dmitriiev
Oleh Dmitriiev
KKKostiantyn Kulahin
Kostiantyn Kulahin
OBOleksii, Alexej, Алексей, Олексій Balenko
Oleksii, Alexej, Алексей, Олексій Balenko
VMVolodymyr Maliuha
Volodymyr Maliuha
Larysa NeduzhaLarysa Neduzha
Larysa Neduzha
This study introduces a hybrid optimization method to enhance the melting characteristics and weld bead morphology of flux-cored wire hardfacing with exothermic addition into the core filler. The Taguchi Design of Experiments (L9 orthogonal array) was used to analyze the effects of key conditions on multiple melting characteristics. The hybrid Taguchi-GRA-PCA effectively identified the best parameter combination, resulting in a significant improvement in overall melting performance. The impact of welding modes on weld bead parameters and melting characteristics was examined. It was determined that the optimal amount of the exothermic addition CuO-Al introduced into the flux-cored wire filler should be a medium level (EA = 28 wt.%). Results showed that wire feed speed WFS and EA had the greatest effect on MOR and DR, while EA and CTWD mainly influenced SF and De. It has been determined that the content of the exothermic additive has a significant impact on the melting process of filler materials, affecting the melting characteristics and weld bead morphology. It has been found that the melting characteristics of deposition rate and spattering factor can be used to optimize welding modes and characterize most output parameters of the welding/surfacing process.

6 May 2025 in Preprints.org
Verified
Preprint
Open access
PDF file
Bohdan TrembachBohdan Trembach
Bohdan Trembach
ITIllia Trembach
Illia Trembach
AGAleksandr Grin
Aleksandr Grin
NMNataliia Makarenko
Nataliia Makarenko
OBOlha Babуch
Olha Babуch
APAnatoliy Panchenko
Anatoliy Panchenko
This paper investigates for the first time self-shielded flux-cored wires with an exothermic MnO2-Al addition and the effect of hardfacing modes on the deposited alloy of the FeCMn system. Additionally, the paper proposes a new experimental research methodology using an orthogonal experimental design with nine experiments and three levels. At the first stage, it is proposed to use the Taguchi plan (L9) method to find the most significant variables. At the second stage, for the development of a mathematical model and optimization, a factorial design is recommended. The studied parameters of the hardfacing mode were: travel speed (TS), set voltage on the power source (Uset), contact tip to work distance (CTWD), and wire feed speed (WFS). The following parameters were studied: welding thermal cycle parameters, microstructure, grain size, non-metallic inclusions, and mechanical properties. The results of the analysis showed that the listed parameters of the hardfacing modes have a different effect on the characteristics of the hardfacing process with self-shielded flux-cored wire with an exothermic addition in the filler. It was determined that for flux-cored wires with an exothermic addition, the size of the deposited metal grain size is most affected by the contact tip to work distance CTWD, to a lesser extent by the travel speed TS and the WFS wire feed speed. The research results showed that the travel speed (TS) had the main influence on the thermal cycle parameters (heat input, cooling time) and hardness. The analysis of the deposited metal samples showed that an increase in the travel speed had a negative impact on the number of non-metallic inclusions (NMIs) in the deposited metal. While the size of NMIs was influenced by the wire feed speed and the set voltage on the power source.

12 December 2023 in Research Square
Verified
Preprint
Open access
PDF file
Bohdan TrembachBohdan Trembach
Bohdan Trembach
YSYury Silchenko
Yury Silchenko
MSMaxim Sukov
Maxim Sukov
KSKostiantyn Sadovyi
Kostiantyn Sadovyi
OKOleksii Kolomiitsev
Oleksii Kolomiitsev
OKOleksii Kabatskyi
Oleksii Kabatskyi
In the conditions of energy crisis an important issue is the increase of energy efficiency and productivity of welding and hadfacing process. The article substantiates the perspective of using exothermic additives introduced into core filler for flux cored wire arc welding process, as a relatively cheap additional heat source, reducing energy consumption for melting of filler materials, and increasing the deposited rate. This article studies the influence of the introduction of the exothermic addition (EA), as well as the ratio (CuO/C) and CuO/Al on arc stability for the FCAW S process. It was determined that various methods can be used to evaluate arc stability, which can be divided into two groups: graphical (current and voltage cyclograms, box plots with frequency histograms, ellipse parameters plotted on current and voltage cyclograms) and statistical (standard variation and coefficients of variation for welding current and arc voltage). In this paper, a comprehensive evaluation of arc stability depending on the composition of the cored wire filler was carried out. Mathematical models of mean values, standard deviation, coefficient of variation for welding current and arc voltage were developed.