The integration of silver nanomaterials into the textile industry has gained attention due to their strong antimicrobial properties. However, concerns remain regarding their environmental impact, particularly at the end of the product life cycle. This study investigates the effect of silver chloride nanoparticles (AgCl NPs) on the biodegradability of polylactic acid (PLA) nonwoven textiles used as disinfectant wipes, considering ageing via standardised washing and abrasion tests. AgCl NPs were applied to nonwovens using the pad-dry-cure method. Their presence and distribution were characterised using FESEM, EDX, DLS, and FTIR-ATR. Biodegradability was assessed by measuring carbon dioxide (CO2) evolution in a controlled soil environment. Antibacterial activity was evaluated using 3M™ Aerobic Count (AC) Petrifilm™ Plates, applied to both textiles and post-biodegradation soil. Ecotoxicity was evaluated via an indirect approach based on Lens culinaris germination and growth, following OECD Test Guideline 208, using soil samples from the biodegradation process. The findings reveal that AgCl NPs hinder PLA biodegradation, significantly reducing CO2 production and indicating bacterial inhibition. Ageing further intensified this effect by concentrating AgCl NPs on the fibre surface, enhancing antibacterial activity while reducing particle adhesion. Although no acute ecotoxicity was detected in plant-based assays, a decline in aerobic bacterial diversity was observed in soils exposed to AgCl NPs-treated samples. These results underscore the need to balance the antibacterial benefits of AgCl NPs with their environmental impact, particularly in products that may contribute to solid waste accumulation. Future research should focus on sustainable alternatives that maintain antibacterial efficiency while ensuring eco-friendly disposal. Graphical Abstract
The absence of dedicated soil-based standards for evaluating textile biodegradability represents a critical limitation in assessing the environmental performance of fibres. This study proposes a standardised and reproducible methodology to assess the biodegradability of textile materials under controlled terrestrial conditions. A 100% cotton fabric, used as a naturally biodegradable model substrate, was employed to systematically investigate the influence of key abiotic factors (pH, temperature, and moisture) on degradation dynamics. CO 2 evolution served as an indicator of microbial activity and mineralisation, while SEM and FTIR analyses characterised the structural and compositional transformations of residual fibres. Statistical analysis enabled the identification of optimal environmental conditions for biodegradation. The results showed that maximum mineralisation and CO 2 evolution were achieved at pH 7.5, 60 °C, and 60% moisture, indicating enhanced biodegradation efficiency. In contrast, acidic pH (6.0) and lower temperatures (25 °C) markedly limited degradation. This integrated approach establishes a soil-based framework for assessing textile biodegradability and provides new insight into the role of abiotic factors. It also supports the development of textile-specific standards to guide the sustainable end-of-life management and the design of biodegradable textiles. Graphical abstract
The textile industry generates significant volumes of waste, making the development of reliable methods to evaluate biodegradability a pressing need. While standardised protocols exist for plastics, no specific methodologies have been established for textiles, and the quantification of non-degraded residues is commonly based on mass loss: a measurement that is prone to recovery errors. This study investigated the biodegradation of cotton, polyester, and cotton/polyester blend fabrics in soil under thermophilic conditions using a combined methodological approach. Carbon mineralisation was quantified through a respirometric assay that was specifically adapted for textile substrates, while residual solid fractions were assessed in situ by X-ray microtomography (micro-CT), thus avoiding artefacts associated with sample recovery. Complementary analyses were performed using SEM and FTIR to characterise morphological and chemical changes. Results showed substantial biodegradation of cotton, negligible degradation of polyester, and intermediate behaviour for the cotton/polyester blend. Micro-CT enabled the visualisation of fibre fragmentation and the quantification of the residual. The integration of respirometric, imaging, and spectroscopic techniques provided a comprehensive assessment of textile biodegradability. This study highlights the potential of micro-CT as a non-destructive tool to improve the accuracy and robustness of textile biodegradability assessment by enabling direct quantification of the residual solid fraction that can support future LCA studies and the development of standardised protocols for textile biodegradability.