This paper analysed the effect of different white carbon black (fumed silica and precipitated silica) on the mechanics and friction property of silicone rubber. The tensile strength, tearing strength, elongation rate and shore hardness of silicone rubber reinforced with different kinds or dosages of white carbon black were investigated in detail. The wear morphology, worn surface analysis and chemical compositions of the rubber sample after the friction test were analysed by means of scanning electron microscopy, three-dimensional profile metre and energy dispersive spectrometer, respectively. Results showed that the mechanics properties of silicone rubber were obviously enhanced with the increase in white carbon black content. Moreover, after the friction test, the vulcanised rubber reinforced with fumed silica has less wear surface protrusions and grinding than that of precipitated silica. The wear rubber filled with fumed silica surface is quite smooth and shows few furrows and grooves, which well corresponds to good anti-wear ability of the reinforcing fillers. In the course of practical application, it is necessary to take into account of the mechanical properties, wear resistance of rubber and the adding amount of filler to achieve the optimum coordination for the best mechanical and friction properties of silicone rubber.
Precise regulation of surface wettability is critical for achieving efficient droplet transport. However, traditional surface preparation methods often suffer from process complexity, high costs, and difficulties associated with large-scale production. In this paper, we propose a suspension-based micro-etching technique for phosphor bronze surfaces, enabling the precise tailoring of droplet transport. First, micro- and nanoscale structures with gradient wettability were constructed on the surface, and then, the adhesion force of droplets was precisely controlled. An in-depth analysis based on a range of characterization methods, including X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), and scanning electron microscopy (SEM), indicated that the superhydrophobic surfaces constructed using the proposed suspension micro-etching technique exhibited more homogeneous microstructures, allowing also for the better control of the surface characteristics, and confirming the extraordinary potential of the proposed technique. Furthermore, the anti-icing and bouncing performance, as well as the self-cleaning ability of the created gradient-based surface, were investigated. The observed performance was consistent with the surface wettability. Overall, we present a cost-efficient, straightforward, and innovative approach to the fabrication of gradient wettability surfaces, which not only expands the palette of preparation techniques but also establishes a foundation for advancing the related fields.