Lokesh Choudhary

Dr. Lokesh Choudhary

orcid

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 October 2022 in Beni-Suef University Journal of Basic and Applied Sciences
Verified
Journal Article
Open access
PDF file
LCLokesh Choudhary
Lokesh Choudhary
SBShubham Bansal
Shubham Bansal
MKMegha Kalra
Megha Kalra
LDLokesh Dagar
Lokesh Dagar
Background: The depletion of natural resources has led to the need of looking out for alternatives of primary construction materials. The use of reclaimed asphalt pavement (RAP) has become a common practice as it reduces economic burden and saves natural resources and energy. This study is based on partial replacement of fresh natural aggregate with reclaimed aggregate. The project is divided into two phases; first one discusses the mechanical viability of replacing 10%, 20%, 30%, 40%, 50% and 60% of fresh aggregates with reclaimed aggregates. The second phase involves the study conducted on a 9.8 KM dense bituminous macadam (DBM) layer, constructed using the most optimum mix from the first phase of study. Finally, a cost analysis of the pavement was conducted to assess its economic viability. Results: In the light of MORTH guidelines, laboratory results showed improvement in the Marshall parameters till 30% replacement of fresh aggregates. Eventually, the DBM layer was constructed using the mix design having 30% replaced fresh aggregates. It showed satisfactory performance after short-term duration without any evidence of rutting or fatigue cracking on surface. Testing of core samples from road stretch proved the negligible degradation with ageing. Conclusion: The DBM constructed using reclaimed aggregate showed a saving of 15% in the total cost.

22 March 2024 in Environment, Development and Sustainability
Verified
Journal Article
Closed access
PDF file
LCLokesh Choudhary
Lokesh Choudhary
VSVaishali Sahu
Vaishali Sahu
ADArchanaa Dongre
Archanaa Dongre

1 January 2024 in SSRN Electronic Journal
Verified
Preprint
Open access
SGShuddhashil Ghosh
Shuddhashil Ghosh
SBShubham Bansal
Shubham Bansal
LCLokesh Choudhary
Lokesh Choudhary
VSVaishali Sahu
Vaishali Sahu
Pervious concrete is acknowledged as an environmentally friendly material due to its capacity to enable water passage and efficiently handle stormwater runoff. This current study delves into the influence of incorporating coconut fiber into pervious concrete pavement, specifically exploring the alterations in mechanical properties through the reinforcement with coconut fiber. The experimentation encompassed the introduction of coconut fiber (0-1 % of the cement's weight) into the mix, along with varying proportions of recycled concrete aggregate (RCA) at 25, 50, 75, and 100 %. The assessment focused on evaluating the resulting pervious concrete's compressive strength, flexural strength, and permeability. The study's outcomes underscore several noteworthy findings. Firstly, the incorporation of coconut fiber was observed to enhance the mechanical properties, particularly the compressive strength and flexural strength of pervious concrete, showcasing improvements with a 1 % fiber content compared to 0 %. This suggests that an optimal fiber content can augment load-bearing capacity and crack resistance. Furthermore, the introduction of coconut fiber did not compromise the permeability of pervious concrete, maintaining it within acceptable limits for effective stormwater management. Additionally, a comprehensive examination of the impact of aggregate size revealed a more pronounced effect on compressive strength in mixes containing RCA. In conclusion, these findings enhance our comprehension of the mechanical properties of pervious concrete and present a sustainable avenue for enhancing its performance. The research opens avenues for the development of environmentally friendly and resilient pavement systems, effectively managing stormwater runoff in urban areas while preserving structural integrity.

1 January 2024 in SSRN Electronic Journal
Verified
Preprint
Open access
LCLokesh Choudhary
Lokesh Choudhary
VSVaishali Sahu
Vaishali Sahu
ADArchanaa Dongre
Archanaa Dongre
With the objective of making today's concreting practices more sustainable, the current study compares ternary geopolymer concrete made with a mix of fly ash, ground granulated blast furnace slag, and metakaolin, along with natural and foundry sand, in two different types of specimens. Several cylindrical, beam, and reinforced slab specimens of M35, M45, and M60 grade geopolymer concrete were cast and tested for compressive strength, flexural strength, split tensile strength, cyclic bending strength, and impact strength during the study. The study's findings demonstrate that ternary geopolymer concrete has higher mechanical strength (compressive, tensile, and fatigue) than traditional ordinary Portland cement (OPC) based concrete. Further, while natural sand specimens were observed performing better than foundry sand specimens, the findings reported for foundry sand samples were found to be within the prescribed strength criteria provided by IS code regulations. The study's findings also provide unique correlations between split tensile strength and characteristic compressive strength of ternary geopolymer concrete that can be reckoned by practicing engineers for ready use. The study's findings encourage the use of foundry sand as a substitute for scarce natural sand. Adding to financial aspect, the study also presents a cost comparison promoting more economic usage of high strength ternary geopolymer concrete over lower grades of concrete.

1 January 2025 in SSRN Electronic Journal
Verified
Preprint
Open access
LCLokesh Choudhary
Lokesh Choudhary
DKDhruv Kumar
Dhruv Kumar
MCMitun Chakraborty
Mitun Chakraborty
This study investigates the characteristics of ternary geopolymer mortar incorporating bacteria as a self-healing agent. The research aims to develop a novel self-healing ternary geopolymer mortar using fly ash (FA), ground granulated blast furnace slag (GGBS), and metakaolin (MK) as source materials for the geopolymer binder. Bacillus subtilis, a self-healing bacteria activated by moisture, is integrated into the mix design to produce calcium carbonate for filling microcracks. The study examines the physical and chemical properties of the raw materials, mix design, and specimen preparation. Visual inspection, compressive strength testing, and scanning electron microscopy (SEM) are employed to evaluate the performance of the geopolymer mortar. Results indicate that bacteriasupplemented samples exhibit higher compressive strength and improved self-healing capabilities compared to non-bacteria samples. The research contributes to the development of sustainable construction materials with enhanced durability and reduced maintenance requirements.

1 January 2025 in SSRN Electronic Journal
Verified
Preprint
Open access
LCLokesh Choudhary
Lokesh Choudhary
RSRavi Sharma
Ravi Sharma
VSVaishali Sahu
Vaishali Sahu
With growing concerns over the depletion of natural resources, the use of recycled concrete aggregates (RCA) has gained attention as a sustainable alternative to natural aggregate (NA). While RCA has been widely explored in highway construction, its application in non-bituminous layers of aircraft pavements, including runways, taxiways, and aprons, remain underexplored. This study investigates the feasibility of RCA in these applications through a two-phase approach. In the first phase, laboratory trials were conducted by replacing NA with 100 % RCA in granular sub-base (GSB) and cement treated sub-base (CTSB), and 80 % RCA in wet mix macadam (WMM). These mixes were assessed for mechanical and durability properties to ensure compliance with standard specifications. The second phase involved constructing trial pavement sections using the optimized RCA-based mix designs, followed by field performance evaluations and quality control tests. The results demonstrated that RCA as a granular material meets the ministry of road transport and highways (MORTH) and federal aviation administration (FAA) specifications, ensuring structural adequacy and long-term performance. The trial sections exhibited satisfactory field performance, confirming the feasibility of RCA for sustainable pavement construction. This study highlights RCA as an environmentally friendly and resource-efficient alternative for non-bituminous layers in aircraft pavements. The successful implementation of RCA in such critical infrastructure can significantly contribute to reducing construction waste, conserving natural aggregates, and promoting sustainable construction practices.