Zafer UTLU

Prof. Dr. Zafer UTLU

orcid

Research Focus & Metrics

Academic Career Length

21Years (2006-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 November 2011 in Journal of the Energy Institute
Verified
Journal Article
Closed access
DEDemir
Demir
BDB Demir
B Demir
ZUZafer UTLU
Zafer UTLU
GKGunnur KOCAR
Gunnur KOCAR
AHA Hepbasli
A Hepbasli
This study deals with the exergetic assessment of the biodiesel production process from canola oil (CAO). In this regard, exergy analysis is applied to the process of methyl ester obtained from CAO first. The energy and exergy relations used in the analysis are presented next. The performance of the whole biodiesel system along with its main components is then evaluated using energy and exergy analysis methods. Finally, the biodiesel production from CAO is assessed using these analysis methods, while the results obtained are discussed. The overall mean energy and energy efficiencies of the biodiesel production process in the period studied are found to be 96·50 and 75·60% respectively. It is expected that the results of this study will be helpful in developing highly applicable and productive planning for biodiesel production.

3 May 2018 in Energy Technology
Verified
Journal Article
Closed access
PDF file
ZUZafer UTLU
Zafer UTLU
UPUfuk Paralı
Ufuk Paralı
ÇGÇağrı Gültekin
Çağrı Gültekin

9 February 2006 in International Journal of Energy Research
Verified
Journal Article
Closed access
PDF file
ZUZafer UTLU
Zafer UTLU
AHArif Hepbasli
Arif Hepbasli
This study deals with evaluating the energy and exergy utilization efficiencies in the Turkish agricultural sector over a 12-year period from 1990 to 2001. In the energy and exergy analyses, two main energy sources, namely fuels and electricity, are taken into consideration, while the sectoral energy and exergy efficiencies are compared for this period. These main energy sources include diesel for tractors and other vehicles, and electricity for pumps. Overall energy utilization efficiencies are obtained to vary between 29.1 and 41.1%, while overall exergy utilization efficiencies are found to range from 27.9 to 37.4% in the analysed years, respectively. It may be concluded that the present technique proposed here may be used as a useful tool in analysing and evaluating the energy and exergy utilization efficiencies, identifying energy efficiency and/or energy conservation opportunities and dictating the energy strategies of countries. Copyright © 2005 John Wiley & Sons, Ltd.

3 October 2011 in Drying Technology
Verified
Journal Article
Closed access
ZUZafer UTLU
Zafer UTLU
AHArif Hepbasli
Arif Hepbasli
MTMuharrem Turan
Muharrem Turan
In recent years, exergy analysis has been widely used in the design, operation, and performance assessment of various thermal systems, among which drying, which is an energy intensive operation, is of a great importance. In the ceramic industry, it is aimed at utilizing a minimum amount of energy in order to remove the maximum moisture for the desired final conditions of the product to be dried. In this study, energy and exergy analyses of a ceramic plant, located in Izmir, Turkey, with a yearly production capacity of 24 million m2 were performed using the actual operational data over a period of 12 months. The drying system at the three stages was analyzed and the values for exergy destruction and efficiency for each component of the system and the whole system at a reference (dead state) temperature of 22°C were calculated. For the month of January, energy and exergy efficiencies for the spray dryer (SD) were determined to be 65.50 and 53.7%, respectively. Energy and exergy efficiency values of the vertical dryer (VD) were 45.12 and 43.3%, respectively, and those of the furnace (F) were 35.08 and 16%, respectively. Based on this one-year assessment, the energy efficiency values for the SD, VD, and F varied between 58.48 and 65.50%, 42.44 and 50.87%, and 30.44 and 36.99%, and the exergy efficiency values were in the range of 44.85–65.16%, 34.92–45.42%, and 12.73–16.41%, respectively.

1 October 2007 in Energy Policy
Verified
Journal Article
Closed access
ZUZafer UTLU
Zafer UTLU
AHArif Hepbasli
Arif Hepbasli

9 March 2007 in Building and Environment
Verified
Journal Article
Closed access
ZUZafer UTLU
Zafer UTLU
AHArif Hepbasli
Arif Hepbasli