This work reports on dyeing of nylon/elastane fabric with water-soluble phthalocyanines ( 1-4 ) bearing quinoline 5-sulfonic acid substituents on the peripheral or nonperipheral positions and determining the antibacterial efficiency of the phthalocyanine compounds and the dyed nylon/elastane fabrics. The light, washing, water, perspiration, and rubbing fastness properties of nylon/elastane fabrics dyed with phthalocyanines were also determined. The results showed that all dyed fabrics showed very good wet fastness values. The lightfastness value of the nylon/elastane fabric dyed with phthalocyanine dye ( 1 ) showed a much better value than the others. Also, the antibacterial efficiencies of the dyed nylon fabrics and the dye compounds were investigated against a gram-negative ( Escherichia coli ) and a grampositive ( Staphylococcus aureus ) bacteria by using disc diffusion method. The results showed that the dyed nylon/elastane fabrics and the compounds exhibited antibacterial activities against both bacteria.
30 April 2024 in Yüzüncü Yıl Üniversitesi Fen Bilimleri Enstitüsü Dergisi
Mikrodalga ortamında C.I. Reactive Yellow 138:1 boyarmaddesinin pamuk elyafı üzerine boyama proses çalışmaları yapıldı. Boya prosesleri, L, ML, M mikrodalga seviyelerinde, pamuklu kumaşın seçilen reaktif boyarmadde ile zamana bağlı olarak boyama işlemleri yapıldı. Tüm boyanan kumaşların K/S değerleri ölçüldü. Tüm veriler kullanılarak 0., I., II. Derece hız denklemleri oluşturuldu ve II. Derece hız denklemine uygun olduğu belirlenerek hız sabitleri hesaplandı. Mikrodalga ortamda boyama renk derinliğinin zamana bağlı olarak arttığı görülmüştür. Konvansiyonel reaktif boyama proses süresi 90 dakikadır, boyalı kumaşın K/S değeri 6.35’tir. Mikrodalga ortamda L seviyesinde boyama süresi 10 dakikada tamamlanmıştır, boyalı kumaşın K/S değeri 6.72 olup, daha derin renk elde edilmiştir. Mikrodalga ortamda boyama işlem süresinin geleneksel yöntemlere göre oldukça azaldığı gözlemlenmiştir.
1 April 2024 in Journal of the Turkish Chemical Society Section B: Chemical Engineering
The effect of accelerator type on vulcanization characteristics and mechanical properties of natural rubber was investigated. Also, the effect of growing quantity of MBTS on vulcanization characteristics and mechanical properties of natural rubber was investigated. The results show that the fastest cure time is obtained with thiurams and dithiocarbamates for natural rubber. Sulphenamides, especially TBBS gives the best tensile strength. Elongation at break first increases by increasing dose of MBTS and then decreases. The higher elongation at break is obtained with DPG.
In this study, the dyeing kinetics of polyamide fabrics with acid dyes, such as Telon Blue M2R, under both conventional and microwave-assisted heating conditions were comprehensively investigated. While the conventional dyeing reaction was completed in 30 min, microwave-assisted dyeing was performed in the microwave device for 10 min. Dyeing kinetics were investigated as a function of reaction time, reaction concentration and dyeing temperatures. The K/S values (color depth) of the dyed fabrics were correlated with the concentration. A significant reduction in the dyeing process time for polyamide fabric was observed with microwave heating compared to the conventional method. Kinetic analysis revealed that the Pseudo-Second-Order (PSO) kinetic model provides a better fit to the experimental data on the diffusion process of acid dye in polyamide fabrics, as evidenced by higher correlation coefficients (R2) compared to the Pseudo-First-Order (PFO) model. The activation energy of the reaction in dyeing was found to be 63.27 kJ/mol, and the Arrhenius constant was determined as 7.20 × 1010 L/g·min in conventional media and 18.70 × 1010 L/g·min in microwave media. The Arrhenius factor in the microwave medium was more than two times higher than in the conventional media.
30 August 2024 in Journal of the Turkish Chemical Society Section A: Chemistry
: EPDM (ethylene propylene diene monomer) is a type of synthetic rubber. The products of rubber have great importance in every part of life. EPDM rubber has high tensile strength, high tension, toughness, and is weather resistant. Therefore, EPDM (ethylene-propylene-diene rubber) is widely used in many fields. The aim of this study is to examine the effect of accelerator type on mechanical properties and vulcanization characteristics of EPDM rubber. We used the accelerators; thiazole, sulfonamides, dithiocarbamate, thiuram, and guanidine groups. The results show that the fastest cure time and the best tensile strength are achieved with dithiocarbamates for EPDM rubber.
This study investigates the acid dyeing of Polyamide 6 (PA6) fabric by comparing conventional heating and microwave-assisted techniques. The influence of critical process parameters—namely pH, temperature, dyeing time, and dye concentration—on color strength (K/S) was systematically evaluated using C.I. Acid Blue 324. Results indicated an inverse correlation between pH and K/S for both methods, with the maximum color yield achieved at pH 3.0. While dye uptake improved with increasing temperature, time, and concentration in both systems, the microwave-assisted approach (160 W) significantly accelerated the process. Optimal conditions for conventional dyeing were established at pH 3, 95 °C, and a 30 min reaction time with 1.5% dye concentration. In contrast, the microwave-assisted process reached equivalent exhaustion levels in only 10 min under otherwise identical conditions. The findings confirm that microwave-assisted dyeing is a rapid, energy-efficient, and sustainable alternative for PA6 processing, offering substantial reductions in production time.