Songlin Wang

Dr. Songlin Wang


Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
17 March 2021 in Sensors
Verified
Journal Article
Open access
PDF file
HDHanjie Dou
Hanjie Dou
SWSonglin Wang
Songlin Wang
Changyuan ZhaiChangyuan Zhai
Changyuan Zhai
LCLiping Chen
Liping Chen
Xiu WangXiu Wang
Xiu Wang
ZXZhao Xueguan
Zhao Xueguan
Sprayer boom height (Hb) variations affect the deposition and distribution of droplets. An Hb control system is used to adjust Hb to maintain an optimum distance between the boom and the crop canopy, and an Hb detection sensor is a key component of the Hb control system. This study presents a new, low-cost light detection and ranging (LiDAR) sensor for Hb detection developed based on the principle of single-point ranging. To examine the detection performance of the LiDAR sensor, a step height detection experiment, a field ground detection experiment, and a wheat stubble (WS) height detection experiment as well as a comparison with an ultrasonic sensor were performed. The results showed that the LiDAR sensor could be used to detect Hb. When used to detect the WS height (HWS), the LiDAR sensor primarily detected the WS roots and the inside of the WS canopy. HWS and movement speed of the LiDAR sensor (VLiDAR) has a greater impact on the detection performance of the LiDAR sensor for the WS canopy than that for the WS roots. The detection error of the LiDAR sensor for the WS roots is less than 5.00%, and the detection error of the LiDAR sensor for the WS canopy is greater than 8.00%. The detection value from the LiDAR sensor to the WS root multiplied by 1.05 can be used as a reference basis for adjusting Hb, and after the WS canopy height is added to the basis, the value can be used as an index for adjusting Hb in WS field spraying. The results of this study will promote research on the boom height detection method and autonomous Hb control system.

27 February 2024 in Chemosensors
Verified
Journal Article
Open access
PDF file
XSXu Sun
Xu Sun
SWSonglin Wang
Songlin Wang
Wenshen JiaWenshen Jia
Wenshen Jia
China is a large consumer of meat and meat products. People’s daily diets include a variety of meat, but meat food adulteration problems are common. This paper discusses the research progress of the electronic nose and near-infrared spectroscopy in the field of meat adulteration detection. Through the study of dozens of related papers in recent years, it has been found that the use of the electronic nose and near-infrared spectroscopy for meat detection has the advantages of speed, a nondestructive nature, high sensitivity, strong quantitative analysis, high automation, a wide applicability, an improved product quality, and cost reduction over the traditional detection, but it may be limited in detecting the adulteration of a specific meat, and there are issues with the life and stability of the sensors of the electronic nose in the process of detection, along with the problems of the high requirements for the modeling of the data of near-infrared spectroscopy. This paper takes adulterated meat as the research object and briefly summarizes the detection principles of the electronic nose and near-infrared spectroscopy, as well as the types of sensors applied in the electronic nose. The research progress of the electronic nose and near-infrared detection technology in meat adulteration assessment is reviewed, the advantages and disadvantages of the two in practical application are analyzed, the classification of pattern recognition methods and their applications in meat identification are described, and the feasibility and practical significance of the joint application of the two in meat adulteration detection are envisioned. Meanwhile, the challenges faced by the two in meat detection are pointed out.

14 January 2025 in Journal of Agricultural Engineering
Verified
Journal Article
Open access
PDF file
JYJie Yan
Jie Yan
JWJianyu Wang
Jianyu Wang
CLChi Lv
Chi Lv
SWSonglin Wang
Songlin Wang
Spray booms can often tilt during operation due to factors such as uneven ground, tires deformation and crop canopy structure and height, adversely affecting droplet deposition. Therefore, it is crucial to study and understand how spray height and nozzle tilt angle affect droplet deposition to enhance the effectiveness of Plant Protection Products (PPPs) application. The TeeJet®XR8002 nozzle was selected as the research object, and simulations and spray tests were conducted at three spray heights (0.5, 0.6, and 0.8 m) and 10 tilt angles (1°~10°). The film length and nozzle tilt angle were used to determine the relative position of the virtual origin and the center coordinates to determine the tilt angle of the spray model. Depositional characteristics at different spray heights were analyzed using the ratio of deposition and changes in the spray height. The dense spraying effect was observed when the nozzle was tilted at spray heights of 0.5, 0.6, and 0.8 m. For spray heights of 0.8, 0.6, and 0.5 m, the maximum allowable tilt angles were 4°, 3°, and 4°, respectively, to ensure that the effect of changes in tilt angle on droplets deposition is minimized. The maximum relative errors with respect to the experimental tests for the accurate deposition ratio and deposition ratio were 3.09% and 4.64%, respectively, thus validating the reliability of the simulation results.