Jerzy Zagórski

Mr. Jerzy Zagórski

orcid

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
6 January 2021 in Materials
Verified
Journal Article
Open access
PDF file
DMDmitrij Morozow
Dmitrij Morozow
Marek BarlakMarek Barlak
Marek Barlak
ZWZbigniew Werner
Zbigniew Werner
Marcin PisarekMarcin Pisarek
Marcin Pisarek
PKPiotr Konarski
Piotr Konarski
Jacek CabanJacek Caban
Jacek Caban
The paper is dedicated to the life prolongation of the tools designed for deep-hole drilling. Among available methods, an ion implantation process was used to improve the durability of tungsten carbide (WC)-Co guide pads. Nitrogen fluencies of 3 × 1017 cm−2, 4 × 1017 cm−2 and 5 × 1017 cm−2 were applied, and scanning electron microscope (SEM) observations, energy dispersive spectroscopy (EDS) analyses, X-ray photoelectron spectroscopy (XPS) and Secondary Ion Mass Spectrometry (SIMS) measurements were performed for both nonimplanted and implanted tools. The durability tests of nonimplanted and the modified tools were performed in industrial conditions. The durability of implanted guide pads was above 2.5 times greater than nonimplanted ones in the best case, presumably due to the presence of a carbon-rich layer and extremely hard tungsten nitrides. The achieved effect may be attributed to the dissociation of tungsten carbide phase and to the lubrication effect. The latter was due to the presence of pure carbon layer with a thickness of a few dozen nanometers. Notably, this layer was formed at a temperature of 200 °C, much smaller than in previously reported research, which makes the findings even more valuable from economic and environmental perspectives.

10 May 2022 in Materials
Verified
Journal Article
Open access
PDF file
Jacek WilkowskiJacek Wilkowski
Jacek Wilkowski
Albina JegorowaAlbina Jegorowa
Albina Jegorowa
Marek BarlakMarek Barlak
Marek Barlak
ZWZbigniew Werner
Zbigniew Werner
JZJerzy Zagórski
Jerzy Zagórski
MKMichał Kruk
Michał Kruk
The paper presents the effect of nitrogen ion implantation on the tool life of the tools commonly used in the furniture industry for drilling particleboards. Nitrogen ions with different accelerating voltages of 25, 40, 55, and 70 kV and a fluence of 5 × 1017 cm−2 were implanted into the surface of commercially available high-speed steel (HSS) drills, using the implanters without mass-separated ion beams. The tests were carried out in a computerized numerical control (CNC) machining center used in the furniture industry. Based on the measurements of the direct tool wear indicator (W), the drill wear curves were determined and the relative tool life index, standard deviation, coefficient of variation, and the implantation quality index of tool life were calculated. The studies have shown that the modification of the drill surface layer by the nitrogen ion implantation process increases the tool life. The obtained results allow the research to be the continued in a wider scope.

17 April 2019 in Wood and Fiber Science
Verified
Journal Article
Closed access
PDF file
Jacek WilkowskiJacek Wilkowski
Jacek Wilkowski
Marek BarlakMarek Barlak
Marek Barlak
ZWZbigniew Werner
Zbigniew Werner
JZJerzy Zagórski
Jerzy Zagórski
PCPaweł Czarniak
Paweł Czarniak
KSKarol Szymanowski
Karol Szymanowski
Life-time improvement and the cutting forces in nitrogen-implanted drills during wood-based material machining

11 October 2022 in Applied Sciences
Verified
Journal Article
Open access
PDF file
Jacek WilkowskiJacek Wilkowski
Jacek Wilkowski
Marek BarlakMarek Barlak
Marek Barlak
ZKZdzisław Kwidziński
Zdzisław Kwidziński
AWAdam Wilczyński
Adam Wilczyński
PFPiotr Filipczuk
Piotr Filipczuk
Tomasz RogozińskiTomasz Rogoziński
Tomasz Rogoziński
The paper presents the effect of nitrogen ion implantation on tool wear and tool life during the sawing of wood-based materials in the industrial production of door frames. The circular saw blades used in machining had WC-Co carbide teeth. Saw teeth were modified by ion implantation. The total implanted dose of nitrogen ions was 5 × 1017 cm−2 (2 × 2.5 × 1017 cm−2) and ions were implanted at 50 kV acceleration voltage. Tool wear testing was carried out under industrial production conditions for the door frames made of wood-based materials. The wear of circular saw teeth was evaluated under an optical microscope. Based on the tool’s wear and machining distance, a mathematical linear model of the non-treated and ion-implanted tools’ life was developed using the linear least squares method. The study showed less wear of the implanted circular saw blades and a significant increase in the estimated lifetime of modified tools compared to non-treated (control) tools. At the same time, activation of the surface of the implanted circular saw teeth was observed, manifested by an increase in adhesion and the appearance of the secondary structures on the WC-Co surface.

15 October 2025 in Energies
Verified
Journal Article
Open access
PDF file
Przemysław SnopińskiPrzemysław Snopiński
Przemysław Snopiński
Marek BarlakMarek Barlak
Marek Barlak
JZJerzy Zagórski
Jerzy Zagórski
Marek PagáčMarek Pagáč
Marek Pagáč
The development of advanced energy materials is critical for the safety and efficiency of next-generation nuclear energy systems. Aluminum alloys present a compelling option due to their excellent neutronic properties, notably a low thermal neutron absorption cross-section. However, their historically poor high-temperature performance has limited their use in commercial power reactors. This makes them prime candidates for specialized, lower-temperature but high-radiation environments, such as research reactors, spent fuel storage systems, and spallation neutron sources. In these applications, mitigating radiation damage—particularly swelling and embrittlement from helium produced during irradiation—remains a paramount challenge. Grain Boundary Engineering (GBE) is a potent strategy to mitigate radiation damage by increasing the fraction of low-energy Coincident Site Lattice (CSL) boundaries. These interfaces act as effective sinks for radiation-induced point defects (vacancies and self-interstitials), suppressing their accumulation and subsequent clustering into damaging dislocation loops and voids. By controlling the defect population, GBE can substantially reduce macroscopic effects like volumetric swelling and embrittlement, enhancing material performance in harsh radiation environments. In this article we evaluate the efficacy of GBE in an AlSi10Mg alloy, a candidate material for nuclear applications. Samples were prepared via KOBO extrusion, with a subset undergoing subsequent annealing to produce varied initial grain sizes and grain boundary character distributions. This allows for a direct comparison of how these microstructural features influence the material’s response to helium ion irradiation, which simulates damage from fission and fusion reactions. The resulting post-irradiation defect structures and their interaction with the engineered grain boundary network were characterized using a combination of Transmission Electron Microscopy (TEM) and High-Resolution Transmission Electron Microscopy (HRTEM), providing crucial insights for designing next-generation, radiation-tolerant energy materials.

21 March 2026 in Materials
Verified
Journal Article
Open access
PDF file
Marek BarlakMarek Barlak
Marek Barlak
Jacek WilkowskiJacek Wilkowski
Jacek Wilkowski
RARadosław Auriga
Radosław Auriga
JZJerzy Zagórski
Jerzy Zagórski
PBPiotr Boruszewski
Piotr Boruszewski
PBPiotr Boruszewski
Piotr Boruszewski
This work explores the effect of nitrogen ion implantation on the wettability of the cemented tungsten carbide–cobalt (WC–Co) tool surface used for wood-based panel machining. Nitrogen ions with an energy of 50 keV and a fluence of 1 × 1017 and 5 × 1017 cm−2 were implanted into the surface layer of commercially available WC–Co indexable knives using the implanter without a mass-separated ion beam. The wettability was characterized by a contact angle instrument. The implantation of nitrogen ions into WC–Co tools caused a statistically significant and practically useful decrease in the contact angle. This obtained effect was dependent on the fluence of the implanted ions, and it changed over time. This effect may also explain the transfer from the workpiece and the surface capture of carbon atoms in the secondary structure formed during the machining of wood materials on tools with ion implantation. On the other hand, the layer of carbon on the surface of the tool formed during machining explains the reduction in friction coefficient observed in experiments and the increase in tool life during cutting.