Human upper-limb movement is produced through the antagonistic action of tendons and is controlled in a joint space-oriented manner. Inspired by this functionality, a fully decoupled tendon-driven humanoid arm (FDTDH-Arm) is proposed, in which joint space decoupling is achieved at the mechanical level via humanoid antagonistic actuation and joint regulation rather than complex modeling-based compensation. To characterize the motion behavior introduced by rolling constraints, joint-level and whole-arm kinematic models are established. A prototype of the proposed arm is developed and experimentally validated. The results demonstrate effective mechanical joint space decoupling, passive joint stiffness of the same order of magnitude as that reported for the human upper limb, a mean positioning error of 0.40 mm, and rapid whole-arm motion with a maximum end effector velocity of 3.62 m/s. The proposed design provides a mechanical implementation and biomimetic solution for humanoid manipulation in human-interactive environments.
22 April 2026 in IEEE Robotics and Automation Letters
Fixed-position grasping is an efficient strategy in robotic assembly. Adaptive grippers employing differential mechanisms (DMs) can passively compensate for misalignment between gripper and object. However, conventional DMs, such as gear-based differential mechanisms (GDMs), are limited by rotational inertia and friction, generating excessive contact forces that compromise the object's positional stability and ultimately degrade assembly accuracy. To address this issue, a single-actuator gripper based on an antagonistic cable-driven differential mechanism (CDDM) is proposed, in which differential cable tensions are converted into low-friction pulley rotations to enable low-contact-force adaptive grasping. The kinematic relationship between the CDDM and the gripper stroke is modeled, and a kinematics-based optimization method is developed to minimize the gripper's dimensions and achieve the prescribed stroke without converging to local optima. Furthermore, the dynamics of the CDDM-based gripper are established to evaluate the contact forces on the object. Finally, an adaptive CDDM-based gripper is built to validate its payload capacity, repeatability, and adaptive performance in fixed-position grasping. Experimental results show that the proposed gripper outperforms a gear-based design, reducing the contact force by 53.28%, a repeatability displacement accuracy of less than 0.30 mm during the long-term operation, and limiting error to 0.28 mm for picks with a 4.02 mm positional offset.