This paper proposes a novel two-stage topology for a 6.6 kW on-board charger. The first stage, employing an interleaved bridgeless totem-pole AC/DC in critical conduction mode (CRM) to realize zero voltage switching (ZVS), is operated at over 300 kHz. A bi-directional CLLC resonant converter operating at 500 kHz is chosen for the second stage. A variable DC-link voltage is adopted to track the wide battery voltage range so that the CLLC resonant converter can always operate at its most efficient point. 1.2 kV SiC devices are adopted for the AC/DC stage and the primary side of DC/DC stage while 650 V GaN devices are used for the secondary side of DC/DC stage. In addition, PCB winding coupled inductors and integrated transformer are implemented in AC/DC stage and DC/DC stage respectively for the purpose of high density and manufacture automation. The proposed structure is demonstrated to have 37 W/in3 power density and above 96% efficiency over the entire battery voltage range, which far exceeds the current practice.
31 July 2017 in IEEE Transactions on Industrial Electronics
Isolated high output current dc/dc converters are critical for power supplies in information technology industries. LLC converters with a matrix transformer are suitable for these applications due to their high efficiency and high power density. By pushing switching frequency up to MHz with GaN devices, planar matrix transformers with printed circuit board (PCB) windings are advantageous over conventional transformer designs, but the large interwinding capacitance of the PCB windings provides a critical coupling path for common-mode (CM) noise. In order to analyze the CM noise, the interwinding capacitance of the PCB windings is analyzed, and a related CM noise model is provided in this paper. To suppress the CM noise, shielding layers can automatically be inserted into the PCB windings between the primary and secondary windings in the fabrication process. This paper proposes a novel shielding technique, in which half of the shielding serve as the primary winding. The proposed shielding technique not only suppresses CM noise but improves the efficiency as well. The proposed shielding is verified by experiments on 1-MHz 400 V/12 V 800-W LLC converters with a peak efficiency of 97.7% and a power density of 900 W/in 3 . The proposed shielding reduces CM noise by 30 dB and improves full-load efficiency by 0.2%.
22 June 2018 in IEEE Transactions on Power Electronics
This paper develops a 200 W wide-input-range (64V-160V to 24V) rail grade dc/dc converter based on gallium-nitride devices. A two stage configuration is proposed. The first regulated stage is a two-phase interleaved buck converter (>400kHz) and the second unregulated stage is a LLC (2 MHz) dc transformer. In order to achieve high frequency and high efficiency, the criticalmode operation is applied for the buck converter, and the negative coupled inductors are used to reduce the frequency and the conduction losses. Then a systematical methodology is proposed to optimize the planar coupled inductors. For the unregulated LLC converter, it can always work at its most efficient point and an analytical model is used to optimize the planar transformer. Finally, the proposed dc/dc converter, built in a quarter brick form factor, is demonstrated with 95.8% peak efficiency and 195 W/in3 power density.
5 February 2019 in IEEE Transactions on Industrial Electronics
Based on the statistics of the current situation of hot water in students’ dormitories of Chifeng University, this paper summarizes the characteristics of male and female students’ use of domestic hot water, obtains the relevant laws of university students’ hot water use behavior characteristics, and puts forward the selection and layout of water heaters according to the water use rules, so as to solve the bottleneck problem of hot water use in our school.