11 June 2018 in IEEE Journal of Emerging and Selected Topics in Power Electronics
This paper proposes a novel two-stage topology for a 6.6 kW on-board charger. The first stage, employing an interleaved bridgeless totem-pole AC/DC in critical conduction mode (CRM) to realize zero voltage switching (ZVS), is operated at over 300 kHz. A bi-directional CLLC resonant converter operating at 500 kHz is chosen for the second stage. A variable DC-link voltage is adopted to track the wide battery voltage range so that the CLLC resonant converter can always operate at its most efficient point. 1.2 kV SiC devices are adopted for the AC/DC stage and the primary side of DC/DC stage while 650 V GaN devices are used for the secondary side of DC/DC stage. In addition, PCB winding coupled inductors and integrated transformer are implemented in AC/DC stage and DC/DC stage respectively for the purpose of high density and manufacture automation. The proposed structure is demonstrated to have 37 W/in3 power density and above 96% efficiency over the entire battery voltage range, which far exceeds the current practice.
9 July 2018 in IEEE Transactions on Power Electronics
In this paper, a novel critical-conduction-mode (CRM)-based modulation is proposed for three-phase bi-directional AC/DC converters. With this modulation, the switching frequency variation range shrinks, zero-voltage-switch (ZVS) soft switching is achieved and the switching related loss is reduced, which is especially beneficial for systems operating above hundreds of kHz high switching frequency with wide-band-gap (WBG) power semiconductor devices to achieve both high power density and high efficiency. A 25 kW SiC-based high-frequency three-phase bi-directional AC/DC converter prototype is designed to achieve a power density of 127 W/in, which is at least five times higher than commercial products. All the control functions are digitally implemented with one low-cost microcontroller (MCU), and the aforementioned benefits are experimentally verified on this prototype under both inverter mode and rectifier mode operations. With the proposed soft-switching modulation, the tested peak efficiency is close to 99.0% for this prototype even at above 300 kHz high switching frequency operation.