Hongchang Ding

Dr. Hongchang Ding


Research Focus & Metrics

Academic Career Length

14Years (2013-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
4 April 2022 in IEEE Access
Verified
Journal Article
Open access
HDHongchang Ding
Hongchang Ding
HDHongchang Ding
Hongchang Ding
JLJinhong Li
Jinhong Li
In this paper, a sensorless control strategy of permanent magnet synchronous motor (PMSM) based on fuzzy sliding mode observer (FSMO) is proposed. On the premise of satisfying the Lyapunov stability condition, a sliding mode observer (SMO) is constructed. The sigmoid function is used instead of the sign function as the switching function. The parameters of sigmoid function are adjusted in real time by establishing fuzzy rules to change the convergence characteristics of sigmoid function, so as to improve the observation performance. The back EMF signal extracted by the SMO can be made smoother by using the back EMF adaptive law, which reduces the chattering of the system and the observation error. In order to solve the problem that the traditional phase locked loop (PLL) can not be used when the positive and negative speed of the motor is switched, a tangent function PLL is proposed in this paper. Through the use of tangent function, the value and symbol of back EMF are avoided from entering the system, so as to realize the accurate estimation of rotor speed and rotor position under the condition of positive and negative speed switching. The designed Fuzzy Sliding Mode Observer is simulated in Matlab/Simulink, and the experimental verification is carried out on the 2kW surface mounted PMSM vector control platform with TMS320F28335 as the main control chip. Simulation and experimental results show that this method can effectively track the changes of rotor speed and position when the motor is switched between positive and negative speed, and has the characteristics of fast convergence, small chattering and good robustness.

1 January 2019 in Vacuum
Verified
Journal Article
Closed access
HDHongchang Ding
Hongchang Ding
ZLZikang Li
Zikang Li
XGXiaobin Gong
Xiaobin Gong
MLMaoshun Li
Maoshun Li

8 November 2020 in Processes
Verified
Journal Article
Open access
PDF file
HDHongchang Ding
Hongchang Ding
TCTao Chang
Tao Chang
FLFanyun Lin
Fanyun Lin
This paper takes centrifugal fan as the research object and establishes five impeller models with different blade outlet angles. By means of computational fluid dynamics (CFD), the external characteristics of the centrifugal fan and the internal characteristics, including the velocity, pressure, and turbulent energy distribution, at the middle span plane of the impeller or fan were obtained and compared. In addition, the pressure fluctuations surrounding the impeller outlet were also analyzed. The results showed that the change of the blade outlet angle of the centrifugal fan had a great influence on the performance; the total pressure and efficiency of the fan were the highest when the outlet angle of the blade was increased to 29.5° under the design flow rate; and the influence of the outlet angle on the fan performance was different in off-design conditions. On the other hand, at different flow rates, the change of the internal flow field with the increase of the outlet angle was different. For the pressure fluctuation of the fan, by increasing the blade outlet angle properly under high flow conditions, the fluctuation amplitude of the fan at the blade frequency and its frequency multiplication could be reduced, which is conducive to decreasing the impeller noise. The research results have good guiding significance regarding the design of the pneumatic performance and noise reduction performance of centrifugal fans.

11 October 2019 in Processes
Verified
Journal Article
Open access
PDF file
ZLZikang Li
Zikang Li
HDHongchang Ding
Hongchang Ding
XSXiao Shen
Xiao Shen
YJYongming Jiang
Yongming Jiang
A high specific speed centrifugal pump is used in the situation of large flow and low head. Centrifugal pump parameters need to be optimized in order to raise its head and efficiency under off-design conditions. In this study, the orthogonal experiment design method is adopted to optimize the performance of centrifugal pump basing on three parameters, namely, blade outlet width b2, blade outlet angle β2 and blade wrap angle φ. First, the three-dimensional model of the centrifugal pump is established by CFturbo and SolidWorks. Then nine different schemes are designed by using orthogonal table, and numerical simulation is carried out in CFX15.0. The final optimized combination of parameters is b2 = 24 mm, β2 = 24°, φ = 112°. Under the design condition, the head and efficiency of the optimized centrifugal pump are appropriately improved, the increments of which are 0.74 m and 0.48%, respectively. However, the efficiency considerably increases at high flow rates, with an increase of 6.9% at 1.5 Qd. The anti-cavitation performance of the optimized centrifugal pump is also better than the original pump. The results in this paper can provide references for parameter selection (b2, β2, φ) in the centrifugal pump design.

28 March 2022 in Journal of Electrical Engineering & Technology
Verified
Journal Article
Closed access
PDF file
HDHongchang Ding
Hongchang Ding
XQXiaojun Qin
Xiaojun Qin
LWLinchao Wei
Linchao Wei

19 December 2022 in Journal of Electrical Engineering & Technology
Verified
Journal Article
Closed access
PDF file
XZXinhong Zou
Xinhong Zou
HDHongchang Ding
Hongchang Ding
JLJinhong Li
Jinhong Li